Top 24 Best Gas Spouts

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 8 Single Caps & 1 FREE Vent - We will ship international, buyer pays all shipping charges. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Choose an area where the vent will be above the “full” line. You are now ready to vent. Shipping charges to be calculated, so contact us first. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 2 Single Caps & 2 Vents - Choose an area where the vent will be above the “full” line. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You are now ready to vent. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. We will ship international, buyer pays all shipping charges. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. Shipping charges to be calculated, so contact us first.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 6 Single Caps & 6 Vents - If you want maximum air flow, drill the diaphragm out with a 7/64″ bit.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). This will keep dirt from getting in through the vent, while still allowing air to pass through. Choose an area where the vent will be above the “full” line. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. You are now ready to vent. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 17 Single Caps & 17 Vents - Choose an area where the vent will be above the “full” line. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). If you want maximum air flow, drill the diaphragm out with a 7/64″ bit.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You are now ready to vent. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. This will keep dirt from getting in through the vent, while still allowing air to pass through.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 6 Single Caps & 1 FREE Vent - You are now ready to vent. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Shipping charges to be calculated, so contact us first. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. Choose an area where the vent will be above the “full” line. We will ship international, buyer pays all shipping charges. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 3 Single Caps & 3 Vents - Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You are now ready to vent. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). Choose an area where the vent will be above the “full” line. This will keep dirt from getting in through the vent, while still allowing air to pass through. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 4 Single Caps & 4 Vents - • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You are now ready to vent. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm).   drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Choose an area where the vent will be above the “full” line. This will keep dirt from getting in through the vent, while still allowing air to pass through.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 7 Single Caps & 7 Vents - If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. Choose an area where the vent will be above the “full” line.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You are now ready to vent. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). This will keep dirt from getting in through the vent, while still allowing air to pass through. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer.

 

Gas Spout – Replacement Spout And Cap For Pre 2009 Gas Cans And Water Jugs (White Set or Black Set) - Includes spout, cap, secondary cap, replacement vent, secondary base cap, and flame arrester. Ez-pour replacement spout and vent kit let’s you reuse old cans (for cans sold before 1/1/2009). Colors may vary between black and white, but all units and parts are identical. Easy flow action with superior manufacturing that won’t break down or spill. Due to (carb) california air resources board regulations, this product is banned for sale in the following states ca, ct, dc, de, ma, me, md, nh, nj, ny, oh, pa and va.

 

Hi-Flo Gas Can Spout Kit - Includes 2 base caps with different threads, 1/2″ replacement push in vent, 8″ spout, and 8″ spout extension. Fix your old cans up with a brand new, heavy duty spout (pre 2009 cans only). Ez pour hi-flo can empty a 5 gallon vented can in 35 seconds and comes with 8″ spout extension. Due to (carb) california air resources board regulations, this product is banned for sale in the following states ca, ct, dc, de, ma, me, md, nh, nj, ny, oh, and va. White or black kits have identical parts and vary only in color and packaging.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 8 Single Caps & 8 Vents -   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). This will keep dirt from getting in through the vent, while still allowing air to pass through. Choose an area where the vent will be above the “full” line. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. You are now ready to vent.

 

Gas Can Spout Extension – EZ Pour Spout Extensions With Dipsticks - Included are two extensions as well as two oil dipsticks. Easily extend your current gas can spout with ez-pour’s high quality and easy to use spout extensions. Gas can spout extension, ez pour spout extensions with dipsticks.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 10 Single Caps & 1 FREE Vent - Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. We will ship international, buyer pays all shipping charges. You are now ready to vent. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. Shipping charges to be calculated, so contact us first. Choose an area where the vent will be above the “full” line. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 9 Single Caps & 1 FREE Vent - • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You are now ready to vent. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Shipping charges to be calculated, so contact us first. Choose an area where the vent will be above the “full” line. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. We will ship international, buyer pays all shipping charges.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 9 Single Caps & 9 Vents - This will keep dirt from getting in through the vent, while still allowing air to pass through. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Choose an area where the vent will be above the “full” line. You are now ready to vent. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer.

 

Metal Gas Can Adapter – Add An EZ-POUR Spout To Your Metal Gas Can - Note ez-pour spout is not included. Adapter will connect ez-pour spout to your metal can. Update your trusty metal can with a heavy duty ez-pour spout. Adapt your metal can to fit an ez-pour spout. Will fit old metal cans with 15″ and 175″ necks.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 19 Single Caps & 19 Vents - You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). • keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. This will keep dirt from getting in through the vent, while still allowing air to pass through. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. You are now ready to vent.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Choose an area where the vent will be above the “full” line.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 13 Single Caps & 13 Vents - Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. You are now ready to vent. This will keep dirt from getting in through the vent, while still allowing air to pass through. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm).   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Choose an area where the vent will be above the “full” line. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit.

 

Gas Can Replacement Spout Kit – Update Your Old Can Or Water Jug – 2 EZ POUR Spouts, 7 Piece Kit - Ez-pour replacement spout and vent kit let’s you update old cans. Include 2 spouts, one hi flow that can empty a can in 35 seconds. Easy flow action with superior manufacturing that won’t break down or spill. Includes regular spout, reducer tip, spout caps, 2 base caps, vent cap, replacement vent. Spout works on many types of water or gas cans, check the ez pour website for full list.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 10 Single Caps & 10 Vents - • keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. This will keep dirt from getting in through the vent, while still allowing air to pass through. Choose an area where the vent will be above the “full” line. You are now ready to vent.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 20 Single Caps & 20 Vents - You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm). This will keep dirt from getting in through the vent, while still allowing air to pass through. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer.   Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. Choose an area where the vent will be above the “full” line. You are now ready to vent.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 15 Single Caps & 15 Vents - • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap & gas can vent free shipping to the lower 48 states (+ alaska & hawaii}, ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You may receive vents with a closed diaphragm, depending on the supplier, if this is the case we suggest using a paperclip to poke ~5 holes in the venting area (diaphragm).   drill the final hole with a (31/64″), 1/2″ is close enough, boring bit. This will keep dirt from getting in through the vent, while still allowing air to pass through. Choose an area where the vent will be above the “full” line. You are now ready to vent. Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. If you want maximum air flow, drill the diaphragm out with a 7/64″ bit.

 

Yellow Gas Can Cap That Fits Your Vintage Blitz Spout – 7 Single Caps & 1 FREE Vent - Be gentle when drilling, and check can for any debris now that you have your 1/2″ hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. • Keeps dirt/debris out of your gas cans keeps your carburetors clean • no more gas fumes in your car after filling the gas cans at the station • made in the usa, fall branch, tn out of polypropylene plastic • vintage to new, we have the cap for you • never lose your yellow cap again • fits blitz, kolpin, rotopax, scepter and others • replacement gas can yellow cap gas can vent free shipping to the lower 48 states (+ alaska, hawaii, guam & pr), ships in 24 hours or less and will arrive within 2 to 5 days, depending on your location (designed to fit the vintage blitz gas can spouts) vent installation pre-drill (with a 1/16″ drill bit) a small hole on top of the can, opposite side of the spout. You are now ready to vent. We will ship international, buyer pays all shipping charges. Choose an area where the vent will be above the “full” line. Shipping charges to be calculated, so contact us first. Drill the final hole with a (31/64″), 1/2″ is close enough, boring bit.

 

Scepter ECO Gas Spout (00072) - Fits all scepter 1 1/4, 2 1/5 and 5 gallon containers. Kit containers cap, spout and dust cover. Replacement spout. Child resistant closure.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.