Top 21 Torx Sizes

 

Eklind 25582 8 Piece Torx Series Ergo-Fold Fold-up Set with Ergonomic Handle Torx Sizes: T6 – T25 - Made in usa high quality, industrial grade, professional tools. Includes popular sizes in one convenient handle to keep you from losing individual keys fold a key out to a right angle to get maximum leverage and out completely to operate like a screwdriver. Meets or exceeds all applicable standards and regulations set forth by acument intellectual properties, llc and in ansi, asme, rohs, reach, ca prop 65 and dodd-frank conflict minerals legislation. A hard plastic shell is stronger than steel & a soft over mold for comfort, slip resistance and safety fits comfortably in your hand green for torx. Made with eklind alloy steel heat treated for optimum strength and ductility finished with eklind black finish to resist rust.

 

Sloky STS-TX-B1-15 Preset Torque Screwdriver with Torx Bit 1 Inch and Torx Size TX15 (6 Pieces) - The sloky sts-tx-b1-15 preset torque screwdriver torx bit 1 inch torx is a tx15 torx bit, and is 1 inch in length, which is equal to 25mm. The high alloy steel bits are magnetized and color coded with the hardness of 58-60 hrc. The corresponding torque is 26. 6 in-lb, which equal to 3. Torx bits are packaged in a 6-slot plastic piece which contains six (6) torx bits in the same size. 0 nm.

 

Eklind 10814 14 Piece Short Series Torx L-Key Set with Pouch Torx Sizes: T6 – T55 - Made with eklind alloy steel heat treated for optimum strength and ductility finished with eklind black finish to resist rust. Torx keys will drive torx, torx plus and star recess fasteners, color coded green for torx plastic holder firmly retains each key in a size marked hole. Meets all applicable standards set forth by acument intellectual properties, llc torx and torx plus are registered trademarks of acument intellectual properties, llc. Meets or exceeds all applicable standards and regulations set forth in ansi, asme, rohs, reach, ca prop 65 and dodd-frank conflict minerals legislation. Made in usa high quality, industrial grade, professional tools.

 

Sloky STS-ADT-25-55 Preset Torque Screwdriver Torque Adapters Torx Size TX25 (3 Pieces) - It is 1 1/2 inches in length and 1/2 inch in diameter, its life cycle is 20,000 operations and the accuracy tolerance is +-10%. Three (3) pieces of torque adapters of the same size are packaged in a plastic case. The torque adapter has an universal 1/4 inch hex shank in one end to connect to the handle and a 1/4 inch hex slot in the other end to connect to the bit. Torx bit size is tx25. The corresponding torque is 48. All the torque adapters are magnetized and color coded. 7 in-lb (5. 5 nm). These settings are the same across all the carbide manufacturers worldwide.

 

Eklind 68688 8 Piece 6″ Series Power-T T-Handle Hex Key Set with Pouch Torx Sizes: T8 – T40 - Meets or exceeds all applicable standards and regulations set forth by acument intellectual properties, llc and in ansi, asme, rohs, reach, ca prop 65 and dodd-frank conflict minerals legislation. Torx keys will drive torx, torx plus and star recess fasteners torx and torx plus are registered trademarks of acument intellectual properties, llc color coded green for torx. Made in usa high quality, industrial grade, professional tools. Eklind power-t t-handle hex keys have a soft, textured over mold for extra comfort, slip resistance safety, providing extra leverage and reach identification is permanently molded in the handle. Made with eklind alloy steel heat treated for optimum strength and ductility finished with eklind black finish to resist rust.

 

Sloky STS-TX-B1-07 Preset Torque Screwdriver with Torx Bit 1 Inch and Torx Size TX7 (6 Pieces) - 0 in-lb, which equal to 0. The sloky sts-tx-b1-07 preset torque screwdriver torx bit 1 inch torx is a tx7 torx bit, and is 1 inch in length, which is equal to 25mm. Torx bits are packaged in a 6-slot plastic piece which contains six (6) torx bits in the same size. The corresponding torque is 8. The high alloy steel bits are magnetized and color coded with the hardness of 58-60 hrc. 9 nm.

 

Stahlwille 47TX-E10 Uniflex Socket, 9.4mm Diameter, 3/8″ Drive, 44mm Length, 19mm Width, 9.4mm Torx Size - This stahlwille uniflex socket has a 3/8″ drive for external torx screws and is made from chrome alloy steel which is chrome plated.

 

Sloky STS-TX-LT-08 LT Single Set TX8 Preset Torque Screwdriver with Torx Size TX8 (5 Pieces) - T-type lt handle with torque adapter is measured 2 3/4 inch x 3/4 inch x 2 5/8 inch. The torque adapter which has the industrial standard preset torque is magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 hrc. 5 piece set. Torques are from 53 to 266 in-lb, which equal to 06 to 30 nm.

 

Sloky STS-ADT-07-09 Preset Torque Screwdriver Torque Adapters Torx Size TX7 (3 Pieces) - 9 nm). It is 1 1/2 inches in length and 1/2 inch in diameter, its life cycle is 20,000 operations and the accuracy tolerance is +-10%. All the torque adapters are magnetized and color coded. Three (3) pieces of torque adapters of the same size are packaged in a plastic case. 0 in-lb (0. Torx bit size is tx7. The torque adapter has an universal 1/4 inch hex shank in one end to connect to the handle and a 1/4 inch hex slot in the other end to connect to the bit. These settings are the same across all the carbide manufacturers worldwide. The corresponding torque is 8.

 

Sloky STS-ADT-09-14 Preset Torque Screwdriver Torque Adapters Torx Size TX9 (3 Pieces) - These settings are the same across all the carbide manufacturers worldwide. 4 in-lb (1. The torque adapter has an universal 1/4 inch hex shank in one end to connect to the handle and a 1/4 inch hex slot in the other end to connect to the bit. 4 nm). All the torque adapters are magnetized and color coded. Torx bit size is tx9. It is 1 1/2 inches in length and 1/2 inch in diameter, its life cycle is 20,000 operations and the accuracy tolerance is +-10%. The corresponding torque is 12. Three (3) pieces of torque adapters of the same size are packaged in a plastic case.

 

Sloky STS-ADT-06-06 Preset Torque Screwdriver Torque Adapters Torx Size TX6 (3 Pieces) - Three (3) pieces of torque adapters of the same size are packaged in a plastic case. These settings are the same across all the carbide manufacturers worldwide. All the torque adapters are magnetized and color coded. 6 nm). The torque adapter has an universal 1/4 inch hex shank in one end to connect to the handle and a 1/4 inch hex slot in the other end to connect to the bit. Torx bit size is tx6. 3 in-lb (0. It is 1 1/2 inches in length and 1/2 inch in diameter, its life cycle is 20,000 operations and the accuracy tolerance is +-10%. The corresponding torque is 5.

 

Stahlwille 47TX-E12 Uniflex Socket, 11.1mm Diameter, 3/8″ Drive, 46mm Length, 19mm Width, 11.1mm Torx Size - This stahlwille uniflex socket has a 3/8″ drive for external torx screws and is made from chrome alloy steel which is chrome plated.

 

Sloky STS-TX-B2-07 Preset Torque Screwdriver with Torx Bit 2 Inch and Torx Size TX7 (6 Pieces) - 0 in-lb, which equal to 0. The sloky sts-tx-b2-07 preset torque screwdriver torx bit 2 inch torx is a tx6 torx bit, and is 2 inches in length, which is equal to 50mm. The corresponding torque is 8. The high alloy steel bits are magnetized and color coded with the hardness of 58-60 hrc. Torx bits are packaged in a 6-slot plastic piece which contains six (6) torx bits in the same size. 9 nm.

 

Sloky STS-TX-LT-07 LT Single Set TX7 Preset Torque Screwdriver with Torx Size TX7 (5 Pieces) - 5 piece set. Torques are from 53 to 266 in-lb, which equal to 06 to 30 nm. T-type lt handle with torque adapter is measured 2 3/4 inch x 3/4 inch x 2 5/8 inch. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 hrc. The torque adapter which has the industrial standard preset torque is magnetized and color coded.

 

Sloky STS-TX-B2-08 Preset Torque Screwdriver with Torx Bit 2 Inch and Torx Size TX8 (6 Pieces) - Torx bits are packaged in a 6-slot plastic piece which contains six (6) torx bits in the same size. 2 nm. The corresponding torque is 10. 6 in-lb, which equal to 1. The sloky sts-tx-b2-08 preset torque screwdriver torx bit 2 inch torx is a tx8 torx bit, and is 2 inches in length, which is equal to 50mm. The high alloy steel bits are magnetized and color coded with the hardness of 58-60 hrc.

 

Eklind 92200 10 Piece Torx Series PSD Precision Screwdriver Set with Pouch Torx Sizes: T3 – T20, - Meets or exceeds all applicable standards and regulations set forth by acument intellectual properties, llc and in ansi, asme, rohs, reach, ca prop 65 and dodd-frank conflict minerals legislation. Eklind psd precision screwdrivers have larger handles and a soft over mold for greater comfort and ergonomics includes large spinner cap for precise control size permanently marked on spinner cap. Made with eklind alloy steel heat treated for optimum strength and ductility finished with eklind black finish to resist rust. Made in usa high quality, industrial grade, professional tools. Torx keys will drive torx, torx plus and star recess fasteners torx and torx plus are registered trademarks of acument intellectual properties, llc precision machined tip green for torx.

 

Sloky STS-TX-B1-20 Torx Bit 1 Inch and Torx Size TX20 (6 Pieces) - The sloky sts-tx-b1-20 preset torque screwdriver torx bit 1 inch is a tx20 torx bit, and is 1 inch in length, which is equal to 25mm. 3 in-lb, which equal to 0. The high alloy steel bits are magnetized and color coded with the hardness of 58-60 hrc. Torx bits are packaged in a 6-slot plastic piece which contains six (6) torx bits in the same size. 6 nm. The corresponding torque is 5.

 

Felo 0715761391 Ergonomic Screwdriver Set With Steel Rack includes Slotted, Square, Phillips & Torx Sizes (17 Piece) - Includes insulated slotted sizes 9/64 x 4-inch and 5/32 x 4-inch and insulated phillips sizes ph1 x 3 1/8-inch and ph2 x 4-inch. Includes phillips sizes ph1 x 3 1/8-inch and ph2 x 4-inch and torx sizes t10 x 4-inch, t15 x 4-inch, t20 x 4-inch and t25 x 4-inch. Includes slotted sizes 1/8 x 3 1/8-inch, 5/32 x 4-inch, 7/32 x 5-inch, 1/4 x 5-inch, and 5/16 x 7-inch, square sizes sq1 x 5-inch and sq2 x 6-inch.

 

Sloky STS-ADT-20-50 Preset Torque Screwdriver Torque Adapters Torx Size TX20 (3 Pieces) - Three (3) pieces of torque adapters of the same size are packaged in a plastic case. These settings are the same across all the carbide manufacturers worldwide. All the torque adapters are magnetized and color coded. It is 1 1/2 inches in length and 1/2 inch in diameter, its life cycle is 20,000 operations and the accuracy tolerance is +-10%. The corresponding torque is 44. 0 nm). Torx bit size is tx20. 5 in-lb (5. The torque adapter has an universal 1/4 inch hex shank in one end to connect to the handle and a 1/4 inch hex slot in the other end to connect to the bit.

 

Sloky STS-TX-LT-10 LT Single Set TX10 Preset Torque Screwdriver with Torx Size TX10 (5 Pieces) - The torque adapter which has the industrial standard preset torque is magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 hrc. T-type lt handle with torque adapter is measured 2 3/4 inch x 3/4 inch x 2 5/8 inch. Torques are from 53 to 266 in-lb, which equal to 06 to 30 nm. 5 piece set.

 

Sloky STS-TX-HD-07 HD Single Set TX7 Preset Torque Screwdriver with Torx Size TX7 (3 Pieces) - The torque adapter which has the industrial standard preset torque is magnetized and color coded. 3 piece set. Hd handle (red for torx ) with torque adapter is 5 1/8 inch in height and 1 1/4 inch in diameter. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 hrc. Torques are from 53 to 266 in-lb, which equal to 06 to 30 nm.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.