Yaetek Oxygen Regulator Harris Type Large Tank Gauge Cutting Torch Regulator Outlet 0-200PSI Inlet 0-4000PSI CGA 540
- Regulator is made of solid brass. Inlet- 0-4000 psi. Oxygen 2-5/8” diameter gauges. Outlet pressure-0-200 psi. Inlet thread -cga 540 female.
Victor SR400 Oxygen Regulator Rebuild/Repair Parts Kit
- If these parts are installed incorrectly, serious injury or death may occur. Warning these parts must be installed by a qualified technician.
Hot Max 24224 CGA 540 Oxygen Regulator Inlet Swivel
- Solid brass construction. Quick and easy fix. For use with oxygen regulators. Easy installation. For use with victor style regulators.
Low Pressure Gauge for Oxygen Regulator 0-200 psi – 2.5 inches
- 25 inches easy to read dial in psi and kpa pressure units. Chrome plated steel case and sturdy construction. 0-200 psi pressure gauge for oxygen regulator. 1/4″ npt buttom inlet connector fits most common regulators. For its use in the low pressure side of the oxygen regulator.
Low and High Pressure Gauges for Oxygen Regulator – 2 inches (PAIR)
- 0-200 psi pressure gauge for oxygen regulator. 25 inches easy to read dial in psi and kpa pressure units. Chrome plated steel case and sturdy construction. 0-4000 psi pressure gauge for oxygen regulator. 1/4″ npt buttom inlet connector fits most common regulators.
Uniweld RO100 Centurion Series Oxygen Regulator with “A” Outlet Connection and 540 CGA Inlet
- Regulator is built with a rugged brass body and comes with 1 1/2″ gauges and protective rubber gauge boots. The economical, lightweight centurion series regulators feature a reseatable safety blow off valve that will protect the diaphragm from damage time and time again without the need to replace the valve. Uniweld ro100 centurion series oxygen regulator has an “a” outlet connection and a 540 cga (compressed gas association) inlet.
Chad CGA 540 Brass Core Oxygen Regulator 0-15 LPM
- See description of this product for full disclaimer. Chrome plated steel case and connector, sturdy construction. 1/4″ npt buttom inlet connector fits most common regulators. 0-15 liters per minute gauge for oxygen regulator. Manufacturer chad.
Victor Edge Series ESS3 Oxygen Regulator Rebuild/Repair Parts Kit
- Warning these parts must be installed by a qualified technician. If these parts are installed incorrectly, serious injury or death may occur.
Uniweld RO Patriot Series Oxygen Regulator with “A” Outlet Connection and 540 CGA Inlet
- Uniweld ro patriot series oxygen regulator has an “a” outlet connection and a 540 cga (compressed gas association) inlet. The patriot series regulators feature protective rubber gauge boots, rear inlet service and the specially compounded diaphragm and seat material that provide accuracy and reliability. Replacement delivery gauge is part # g49d. Replacement contents gauge is part # g56d. The regulator provides a delivery pressure of 2-60 psi. It comes with a 100 psi delivery gauge and a 4000 psi contents gauge.
Victor Technologies 0781-0043 SR-250D-540 Medium Duty Single Stage Oxygen Regulator, 5-125 psig Delivery Range, CGA 540 Inlet Connection
- Recommended for applications where slight delivery pressure increases (due to decreasing cylinder pressures) would not affect the performance characteristics of the work or test results. Sr series, 250 single stage, medium duty regulator. The sr250 regulators are designed or medium applications & for medium to large cylinders.
Devardi Glass Lampwork, Beadmaking (or Welding) Heavy Duty Oxygen Regulator
- 1 year warranty. Heavy duty oxygen regulator for oxygen/accetylene or oxygen/propane torch work.
Yaetek Oxygen Regulator CGA540 Heavy Duty Welding Gas Welder Oxygen Regulator Gauges Oxy for Victor Torch Cutting Kits
- High performance oxygen regulator is the perfect replacement for worn out regulators. Brass body, an ideal item to have on hand for any welder. Inlet 0-4000 psi fits most victor style torch sets,outlet pressure 0-100 psi. Package content 1 x oxygen gas welder brass regulator pressure gauge. T-handle for easy adjustments, 2” diameter gauges, inlet thread cga 540 female.
Victor SR350D Oxygen Regulator Rebuild/Repair Parts Kit
- If these parts are installed incorrectly, serious injury or death may occur. Warning these parts must be installed by a qualified technician.
Flame Technologies VMOR-22 Medium Duty Oxygen Regulator, Victor Compatible
- Oem compatible -single stage. Sintered metal inlet filter to trap impurities. Forged brass body & bonnet for maximum strength. Oxygen with safety relief valve for safe operation. Easy to read dual scale gauges with hardy acrylic screw-on lens.
Uniweld RV8010 Heavy Duty Single Stage Oxygen Regulator with CGA540 Inlet
- A. Additionally, as part of our rv80 series, the rv8010 comes with a removable back plug for fast seat servicing. Single stage regulators have greater flow capacity than two stage models. The regulator also includes an externally serviceable pressure relief device (prd) which protects the regulator. S. The prd is not designed to protect the downstream equipment. Made in u. G24) allow you to monitor pressure flowing through the regulator. Uniweld’s rv8010 is a heavy duty, single stage oxygen regulator with a forged brass body and bonnet and a 3-1/4 inch stainless steel diaphragm. Uniweld single stage regulators are used for general purpose applications where nominal delivery pressure changes, due to decreasing cylinder pressure, do not affect operations. The rv8010 comes with a cga540 inlet connection, a “b” right hand 9/16 inch -18 male outlet connection and a delivery pressure of 5-125 psi. A polished brass, single scale, 2-1/2 inch diameter, 0-4000 psi contents gauge (part no. G27) and 0-200 psi delivery gauge (part no.
High Pressure Gauge for Oxygen Regulator 0-4000 psi – 2 inches
- 0-4000 psi pressure gauge for oxygen regulator. Chrome plated steel case and sturdy construction. 2 inches easy to read dial in psi and kpa pressure units. 1/4″ npt buttom inlet connector fits most common regulators. For its use in the high pressure side of the oxygen regulator.
Firepower 0781-9826 250 Series OxyFuel Oxygen Regulator for Tips with a 5-Inch Cutting Capacity
- Ruggedly constructed with high strength alloy bonnet and durable brass fittings. Featuring easy to use simple high contrast gauges that have ergonomic color coded knobs (acetylene & oxygen).
Victor VTS450D & VGT450 Oxygen Regulator Rebuild/Repair Parts Kit
- Lp diaphragm o-ring (7). O-ring (6d, 22b, 21). Nozzle gasket (9), seat assembly (10). Seat assembly (18), nozzle gasket (19). Friction washer (13), friction washer (15).
Harris Single Stage Oxygen Regulator 425-125-540 3000714
- •Forged brass bonnet and body. •One-piece encapsulated seat design with an internal filter and a ptfe teflon® seat. •featured in classic pipeliner® outfits. •Tamper proof, self reseating internal hp safety valve. •Bronze adjusting screw for smooth adjusting.
Ameriflame R250-540 Medium Duty Single Stage Oxygen Regulator with CGA540 Inlet
- Cga540 inlet, maximum inlet 3000 psig. Large brass t-handle for smooth, accurate adjustments. Forged brass bonnet and body. Easy-to-read dual scale 2-inch gauges, 200 and 4000 psi/kg. Reseating pressure relief device where needed for added regulator protection.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
