Top 17 Welding Systems

 

Chicago Electric Welding Systems 90 Amp Flux Wire Welder - Variable speed wire control. Weldable materials mild, low alloy steel (not suitable for aluminum or stainless steel). 120 volts, 20 amps, single phase input. No gas or regulators required. Thermal overload protection with indicator light.

 

Chicago Electric Welding Systems 0.030″ E71T-GS Flux Core Welding Wire, 10 Lbs. - Flux-cored welding wire for single pass applications this self-shielding, all-positioning, flux-cored welding wire is, visit harbor freight tools for more information.

 

RazzaWeld Hand-Held Fusion Welding System - The completed weld is fast, clean and secure–and its start-up cost is far below any comparable welding/soldering alternative. Think about how often you are asked to perform a simple repair or simply need to attach a post to complete a jewelry piece your razzaweld will pay for itself in a remarkably short time. ). The razzaweld accepts the same collets used by the sparkie fusion welder, as well as any fusion finding that works with those collets. So easy and safe to use that no special know-how or training is needed, the razzaweld is ideal for shops where welding is limited to minor repairs, attaching ear and pin posts and the like. The design of the razzaweld tool gives you vastly increased maneuverability in accessing the jewelry items you need to weld onto. Take the system with you just about anywhere you can find a power outlet plug in and you’re ready to go. Razzaweld hand-held welding system. This convenient–and portable–razzaweld hand-held fusion welder holds ear posts, tie tacs, lapel pins and any pin finding. 027″-. The applicator is self-contained, providing both positive and negative charge that completes the circuit when the welder is discharged its long (40″) leads allow you to move freely to and fro, taking the welder to the work rather than trying to fit the work into a welding machine. Effective for use on precious metals as well as base metals (including gold, silver, copper, brass, aluminum, titanium and stainless steel) and welds beautifully onto material as thin as. 007″ (32 ga. 045″ in diameter. The razzaweld system includes a power supply, a gun-style applicator with 40″ leads, and one ear post collet.

 

Chicago Electric Welding Systems CO2/Argon Regulator Gauge - A gas regulator designed for light and medium duty mig/tig welding jobs designed for both mig and tig welding jobs, this, visit harbor freight tools for more information.

 

Welding System - Item welding system. Application- for heavy equipment fabrication and structural fabrication. Overall width- 18-1/2″. Overall height- 38324″.

 

Thermal Arc W1004401 Fabricator 252i Portable 3-in-1 Welding System - Delivers up to 300 amps of welding power. Mig, stick and tig processes all in one unit. Includes fabricator 252i power supply, ground clamp, flow gauge, electrode holder, drive rolls, tips, mig gun and more. Weighs less than 66 lbs. For light industrial manufacturing, mechanical contractors, automotive repairs/customization, farm/ranch and much more.

 

Firepower 1444-0872 MST 220i 3-in-1 Mig Stick and Tig Welding System - Offers 115 and 208/230v and has a maximum output of 210 amps. Mig, stick and tig welding outputs for use anywhere. Automotive repair and customization, mechanical contractors, farms/ranches, maintenance and repair, and garage and job shops. Wirefeed speed range is 100-600 ipm at 230 volts and 100-400 ipm at 115 volts. Maximum plate thickness is 3/8 inch.

 

Thermal Arc W1004403 Fabricator 252i Portable 3-in-1 Welding System with Double Cylinder Cart - 7 m) power cord and nema 6-50p 230v ac plug operator’s manual double cylinder cart specifications and features processes mig (gmaw), flux-cored (fcaw), lift tig (gtaw), stick (smaw) rated output 250a/26. 2 mm) outlet guide, 0. 035″ v groove 0. 5v at 40% duty cycle 200a/24v at 60% duty cycle 150a/21. 9 mm), 0. 5v at 100% duty cycle maximum open circuit voltage 72v dc amperage range 5-300 a wire feed speed 67, 700 imp (1. 045 (1. The 252i delivers the flexibility you need in the field, including applications like light industrial manufacturing, mechanical contractors, automotive repairs and customization, farms and ranches, training institutions, maintenance and repairs. (4 m) lead drive rolls 0. 023″/0. 8 m), male 5/8-18 9 ft. 5 ft. (29. Includes double cylinder cart. (2. (3 m) lead victor edge argon flow gauge tweco weld skill 200 amp electrode holder with 13 ft. 3 lbs. 7, 17. 030″/0. 8 mm), 0. 6mm) 15 ft. The thermal arc w1004403 fabricator 252i portable 3-in-1 welding system features mig, stick and tig processes — complete in one unit. This system includes fabricator 252i power supply tweco weld skill 200 amp ground clamp with 10 ft. This powerhouse delivers up to 300 amps of welding power and weighs less than 66 lbs. 030 (0. Three processes, one machine. 023″ (0. 045″ flux-cored roll contact tips (1 each) 0. 035″/0. 6 kg). There’s never been a portable power system like this before. 045″ v groove lower & flat upper (fitted) 0. 035 (0. (3. 6 m) tweco spray master 250 amp mig gun gas hose, 12. 8 m/min) weight 65. (4.

 

Chicago Electric Welding Systems 180 Amp MIG/Flux Wire Feed Welder - A wire feed welder designed for flux core and mig welding this versatile wire feed welder comes set up for flux core arc, visit harbor freight tools for more information.

 

Fp-165 230V Mig/Flux Cored Welding System-2pack - Weld able wires 0023” to 0035” steel and stainless steel, 0030” to 0035” flux-cored. Package includes mig-130 main unit, welding spool wire, welding face mask, chipping hammer/ wire brush, 25m torch, xtra 2 tips, ground cord, warm notice if you have any problem about this machine, sincerelly hope you could contact seller directly( not than amazon customer service) from amazon buyer central against this order for a replacement or refund enjoy this absolutely risk free purchase today. Duty cycle 10% at 105amp 35% at 60 amp. Variable feed speed control, torch with full on / off safety control. Fp-165 230v mig/flux cored welding system-2pack.

 

Dukane 93597 US906 107804 Welding System US Input - Shipping weight, 3810 lbs (1728kg). Country of origin, united states. Fp-165,mig welding system,230v by victor technologies group inc-firepower.

 

Chicago Electric Welding Systems 8 Ft x 8 Ft Fiberglass Welding Blanket - Made of flame retardant fiberglass and a working temperature of 1,000 degrees fahrenheit, this blanket is essential for welding safety. The metal grommets on each side of the welding blanket keep it secure and ensure full coverage. This welding blanket protects your equipment and working area while welding. This blanket is a must-own for anyone who welds in their shop or garage.

 

Thermadyne 1444-0366 135 Amp MIG/Flux Cored Welding System - This system features a quick change internal polarity adjustment to change between mig (gmaw) and flux cored (fcaw) welding. Designed to operate from a standard household outlet and delivers a high maximum output of 135 amps. The ready to weld system comes complete with tweco weldskill gun, return cable and clamp, input power cord and plug, spool of flux cored wire and an operating manual. This dual purpose mig/flux cored welder includes auto darkening helmet. With its simple operation and key set up chart even the novice can achieve high quality, professional results.

 

Firepower 1444-0871 MST 180i 3-in-1 Mig Stick and Tig Welding System - The mst 180i comes with more power than the mst 140i, it uses 208/230v and has a maximum output of 180 amps. With the mst 180i you can be welding like a pro in no time. This machine features mig, stick, and tig processes in a unit that weighs 33 pounds. Stick (smaw) has 175 amps with 27 volts at 20% duty cycle and a welding output at 104 degrees fehrenheit has 140 amps with 25. 4 volts at 30% duty cycle. 5 volts at 30% duty cycle. The firepower 1444-0871 mst 180i 3-in-1 machine come complete with all the necessary mig and stick components which gives even a beginner the capability to weld immediately, right out of the box. Tig (gmaw) has 175 amps with 17 volts at 25% duty cycle and welding output at 104 degrees fehrenheit has 160 amps with 16. 6 volts at 30% duty cycle. Farms/ranches, auto-applications or on-site repair work are just some of the many things that this machine can do. The mst 180i comes with a quick start guide that walks you through the machine set-up in four simple steps. Mig (gmaw/fcaw) has 180 amps with 23 volts at 20% duty cycle and welding output at 145 degrees fehrenheit has 145 amps with 22. The wirefeed speed range is 100-650 ipm and the maximum plate thickness is 1/4 inch. The mst 180i is spool gun capable for aluminum mig welding.

 

Thermal Arc W1004201 Fabricator 211i 3-in-1 Welding System - For the light to medium fabrication of steel, stainless steel and aluminum. Ideal for automotive repair/customization, farm & ranch, training institutions, sheet metal & light fabrication and more. Weighs less than 58 pounds. Can deliver from 10 to 210 amps of welding output power from 230 volts input or 150 amps from 115 vac. Mig, stick and tig welding capabilities — complete in one integrated portable package.

 

Thermadyne W1003801 200 AMP Stick/Lift TIG Welding System - Also features high frequency or lift tig circuitry for tig welding and includes a trigger hold function (2t/4t), down slope timer, gas solenoid for flow through gas. Features optimized hot start and user adjustable arc-force circuits delivering superior arc starting and control when stick welding. Powerful yet compact and portable, the 201ts can deliver 125 amps on 115 volt circuits for stick welding and 160 amps for tig welding. Ideal for tradesmen or welders with more demanding requirements. Ability to use torch switch or foot control accessories.

 

Thermadyne 1444-0322 90 Amp Flux Cored Welding System - With its simple operation and key set up chart even the novice can achieve high quality, professional results. The ready to weld system comes complete with tweco weldskill gun, return cable and clamp, input power cored and plug, spool of flux cored wire and an operating manual. This system is designed to operate from a standard household outlet and delivers a maximum output of 90 amps. Requiring no shielding gas, it’s ideal for outside use. The new portable fp-95 flux-cored wire welder delivers a basic yet effective welding performance.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.