WeldingCity 10-pcs Premium TIG Welding Tungsten Electrode Rod 2.0% Ceriated (Gray/AWS: EWCe20) Assorted Diameter 1/16″ (5-pcs) and 3/32″ (5-pcs)
- Us based welding supplier strong technical support with experienced customer service to address buyer’s any question msds available per request. Aws specification ewce20 conform to ansi/aws standard a512m/a5122009 iso 68482004 mod. Premium tig welding tungsten electrodes 20% ceriated (gray, ewce20) assorted diameter 1/16″ (5-pk) and 3/32″ (5-pk). 1/16″ (16mm) and 3/32″ (24mm) diameter by 7″ (175mm) length 5-pcs for each size ground annealed. All relevant tig parts (2nd picture) working with these electrodes are available from our store to select correct tungsten electrode please refer to the listed chart (3rd picture for reference only).
TIG Welding Tungsten Electrodes 2% Ceriated 3/32″ x 7″ (Grey, WC20) 10-Pack
- Premium ten (10) pack of grey ewce-2 2% ceriated tungsten rods for tig welding. Free materials safety data sheet (msds) and certificate of conformance provided below in the product information, adhering to american welding society standard a512m/a5122009. United states based manufacturing & customer service staff are here to help you. Highest rated and most reviewed tungsten electrodes on amazon. Electrode size 3/32″ x 7″ or 24mm x 175mm.
TIG Welding Tungsten Electrodes 2% Thoriated Welding Rods 3/32″ x 7″ 10-Pack Red
- Warm tips we’ll send the tungsten electrodes with old and new package at random we guarantee with the same high ,pls feel free to purchasetwo packages details pls kindly see pictures,tks. Tungsten electrode size 3/32″ x 7″ or 24mm x 175mm. The tungsten rods with reliable arc-striking and a low burn-off rate. The tungsten rods can be very good operation even in high current range on dc. Premium 10 pack of red wt20 2% thoriated tungsten electrodes for tig welding.
4 pack, 14″ Welding Electrode Rod Guard Holder Storage Canister
- Rod guard canisters provide great storage and inventory control for all your welding electrodes, rods and filler metals.
ENiCl – 99% Nickel/Cast Iron Welding Electrode – 12″ x 1/8″ (2.2 LB)
- Weld deposit is soft and can be milled, drilled, tapped or machined yet has strength greater than the base metal and the color will match that of cast iron. All position, fully machinable cast iron electrode for repairing and “cold welding” of thin sections of cast iron high nickel core wire generates a quiet steady arc that is extremely easy to handle even with low open circuit ac voltages starting and restriking without sticking to the work piece has never been so easy. Select your electrode diameter and package quantity from the options, check picture #3 and product description for welding parameters 5 sticks and 1 lb packages are shipped using a sealed plastic sleeve 22 lb package is shipped using the plastic box. Common applications include engine blocks, gear housings, machine bases, defective castings, filling holes, and building up worn or missing sections which will have to be machined. Excellent for build-up and welding of gray, malleable, and ductile cast iron to itself or for joining these cast iron types to mild and carbon steel, stainless steel, copper alloys and to copper-nickel monel alloys.
E7018 – Low Hydrogen/High Tensile – Welding Electrode/Rod – 14″ x 1/8″ (PACK: 55 LB)
- Easily removable slag reveals a finely rippled bead appearance and an x-ray quality weld deposit with excellent charpy impact values at sub-zero temperatures (78 ft-lbs at -20°f). Typical applications include structural and fabrication steels such as i-beams, angles, plates, channels, cast steels, cold rolled steel, process piping steels and shipbuilding steels. Quiet steady arc, low spatter, superb re-striking capabilities and high deposition efficiency all made possible by the special low-hydrogen iron powder coating and graphite tip. Select your electrode diameter and package quantity from the options, check picture #3 for welding parameters. A low-hydrogen, all-position electrode for welding carbon steel, high-tensile steel, low alloy steel and free-machining steels, aws/sfa 51 e7018, ac/dc+ (reverse polarity).
Nickel 99 Cast Iron Welding Electrode Repair & Maintenance Rods (1/8″ – 5 PCS)
- 15 applications welding of gray iron castings to themselves as well as joining them to mild steels or stainless steels repair castings building up, joining, filling holes, breaks and cracks in all types of cast iron. Excellent machinability specifications aws a5. Eni-cl 99% nickel alloy electrodes it is perfect for production and repair of cast iron.
4 Pack – 14″ GREEN Welding Electrode Rod Guard Holder Storage Canister
- Holds up to 10 lbs of 12″ or 14″ electrodes. Includes 4 canisters. Color green. 225°f max, 15″ overall length, chloride free. Made in usa.
Pre-Ground TIG Tungsten Sharpened Electrodes Purple Rare Earth Mix 5-Pack (3/32″ x 1.5″)
- Premium five (5) pack of ewg rare earth mix pre-ground tungsten electrode rods for tig welding. American welding society standard aws a512m/a5122009 conformance. United states based manufacturing & customer service staff are here to help you. Highest rated and most reviewed pre-ground tungsten electrodes on amazon. Contains 9834% tungsten, 15% lanthanum, 008% zirconium, and 008% yttrium.
2 Pack – 14″ ORANGE Welding Electrode Rod Guard Holder Storage Canister
- 225°f max, 15″ overall length, chloride free. Color orange. Holds up to 10 lbs of 12″ or 14″ electrodes. Made in usa. Includes 2 canisters.
E308L-16 – Stainless Steel Welding Electrode – 12″ x 3/32″ (4.4 LB)
- 035 mechanical properties of deposited metal test item rm(n/mm2) a (%) requirement 510 30 typical test result 580 45 the above parameters are for reference purpose and depend on diverse factors. 0 9. E308l-16 stainless steel electrode aws a5. 008 0. 50 1. 0-12. Self-removing slag, very low spatter tendency. 62 0. 90 9. 4 welding positions all, except vertical down ac & dc+ (reverse polarity) introduction rutile-basic coated, high-alloy stick electrode. 030 0. 75 typical test result 19. Versatile electrode designed to weld several types of austenitic steels. 75 0. 0 0. 30 0. 040 typical test result 0. 024 1. 00 0. 04 0. Very homogeneous seam finish applications austenite-ferrite joints (dissimilar), cladding, corrosion-resistant layers on non-alloyed construction steels, buffer layers, type 302, 304 and 308 stainless steels, a743 and a744 type cf-8 cast material welding parameters polarity current (amps) 3/32″ (2. 0 mm) dc+ 40-70 60-100 90-140 ac 40-70 60-100 90-140 chemical composition (%) chemical composition c mn si s p requirement 0. 2 mm) 5/32″ (4. 020 chemical composition cr ni mo cu requirement 18. Run tests, evaluate and set your welding parameters before starting the welding job. Excellent ignition and re-ignition characteristics. 4 mm) 1/8″ (3. 80 0. 50 ~ 2. 0-21. Can be welded in any position except vertical down. 040 0.
Blue Demon 7014 X 5/64″ X 14″ X 5LB Plastic Iron Powder Carbon Steel Electrode
- E7014 offers outstanding slag removal and bead appearance. Typical applications include ornamental iron, machine bases, heavy sheet metal and frames. This rod is ideal for jobs that require high deposition and speed of travel.
US Forge Welding Electrode E6011 3/32-Inch by 14-Inch 5-Pound Box #51123
- Has excellent operating characteristics in all positions. Use with ac or dc either polarity. Use on galvanized steels and steels that may have scale, rust, or paint on the surfaces to be welded.
SÜA – Portable Electrode Drying Oven – 22 Lbs (10 Kg) TRC Series – 115 Volts
- Temperature range ambient, 302 °f (ambient, 150 °c) when connected at 115 volts, easy to set-up analog temperature dial. The trc series is a lightweight portable electrode drying oven that prevents electrodes from absorbing moisture that can negatively affect the welding job. Two models available, trc-5 can store up to 11 lbs (5 kg) and trc-10 can store 22 lbs (10 kg) of 18 inches long electrodes or smaller, easy to lift electrodes basket that can be locked open for convenient one-hand operation even with the thickest welding gloves. Can be used at the shop or in the field compatible with generators/welders with 115 volts three plug outlets a must-have when welding e7018, e7024, and other low hydrogen electrodes. Weight empty 95 lb, height 24″, diameter of cylinder 6-½”, inlet power 115v / 220v.
WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Lanthanated (Blue, EWLa20) 3/32″ x 7″ | 10-pcs
- 3/32″ (24mm) diameter by 7″ (175mm) length ground annealed. Us based welding supplier strong technical support with experienced customer service to address buyer’s any question msds available per request. Aws specification ewla20 conform to ansi/aws standard a512m/a5122009 iso 68482004 mod. All relevant tig parts (2nd picture) working with these electrodes are available from our store to select correct tungsten electrode please refer to the listed chart (3rd picture for reference only). 10-pcs premium quality tig welding tungsten electrodes (3/32″) 20% lanthanated (blue, ewla20-332).
50 lb Steel Can E7018 5/32″ Stick electrodes welding rod (E7018 5/32″)
- High quality welding rod . Weight 50 lbs. Size 1/8″ x 14″ length. Aws a 51-04 e7018.
HITBOX Tig Welding Tungsten Electrodes Rod 2% Thoriated Tungsten Welding Rods 0.040″ x 7″ (Red, 10PCS)
- 【Longer lasting welding tungsten】the thoriat has better creep resistance, strong ductility, smaller stirring rate, therefore the tip temperature of thoriated lower, which help to last the service time of the tungsten the service time is long to reduce the downtime for welders. Hitbox 10 pack of blue 2% thoriated tungsten rods for tig welding recommend usage aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corrosive steels. 【Easily sharpened & holds a point】grinding the tungsten to a taper or point eases the transition of arc starting and creates a more focused arc for better welding performance these thoriated tungstens last a longer time, so you do not need much grinding. 【Electrode size】0040″ (10mm) diameter by 7″ (175mm) length please contact us if you get confused of the product, hitbox supply 724 hours online great after sales service. 【super clean welding】this thoriated tungsten holds up well on continuously welding, no unexpected balling or burn back the remained electrode is super clean throughout its use and does not contaminate easily the final weld puddle is clean and easy to control.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
