775 Dc Motor, High Power Torque Extension Shaft Dc Motor 12v/ 24v(24V20000 RPM)
- ♦ Good feature rotor uses copper wire winding, small resistance, strong electrical conductivity, so that the motor torque increased. ♦ Durable it is made of pure copper wire, which has a good feature in low heat, long life, low loss. ♦ Satisfaction guarantee we care for every customer’s feelingif this product does not meet or exceed your expectations,please send it back for a 100% refund no questions asked. ♦ Application it is used in office automation, home automation, medical equipment, security equipment, consumer electronics, aircraft models, automotive electronics fields. ♦ ball bearing it has a high bearing capacity, high speed, and low friction.
Lock Technology LTI1400-Q .5 in. Drive 140Lb Torque Extension – Aqua
- Color aqua. Will torque wheel nuts on most foreign and domestic cars and light trucks to the correct torque, the first time, every time with your thin wall or regular lugnut sockets.
Ken-Tool (30251 Torque Extension
- Tightens nuts to factory specifications each time the wheels are replaced. Converts any impact gun, including those with an extended anvil, into an instant torque wrench by bleeding torque off the impact gun. S. Application chart can be wall-mounted. For passenger cars and light trucks convert your own sockets into torque sockets color and letter coded for quick size and torque reference made in u. . For foreign and domestic cars and light trucks. A.
ABN 1/2in Drive 8in Long Color-Coded Torque Limiting Socket Extension Bar 10pc Tool Kit 65-150 ft/lb Set
- Secure hold these tools have a ball on the male end to help hold a socket spring-loaded ball detent locks to prevent parts from slipping into machinery. Save your lug nuts perfect for use in places with limited access, the abn 1/2″ inch drive 8″ inch long torque limiting socket extension bar 10pc tool kit 65-150 ft/lb set quickly loosens bolts and nuts at awkward angles and in difficult to reach locations for heavy-duty torque applications. Easy storage heavy-duty 75″ x 2″ x 1075″ inch (191cm x 51cm x 273cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Built to last constructed from chromium-molybdenum steel (cr-mo) and manganese phosphate for maximum strength and longevity that resists rust and carrion color-coded aluminum ring identifies each extension bar sizing also permanently laser-etched on bar shaft for quick identification. Package contents package includes (10) extensions bars, green 65ft/lbs (90nm), black 75ft/lbs (100nm), gold 80ft/lb (110nm), blue 100ft/lb (135nm), orange 110ft/lbs (150nm), gray 120ft/lb (160nm), purple 130ft/lbs (175nm), silver 140ft/lb (190nm), and light green 150ft/lbs (200nm) + (1) carrying case for your convenience each torque extension bar has a 1/2-inch drive and 8-inch (203cm) length socket not included.
STEELMAN 60163 1-Inch Drive Dark Purple 350 ft-lb Torque Extension
- Heavy-duty 1-inch drive, both male and female ends are 1-inch drive for use with heavy-duty impact wrenches and sockets. 10-inch extension, torque extension is 10-inches long to allow easy clearance and prevent damage to wheels by a too close impact wrench. Powder coated, powder coated dark purple for additional corrosion resistance and to easily identify it among other extensions and tools. Prevent over-tightening, prevent over-tightening that can lead to premature failure of wheels, wheel studs, and rotors. Flexes to limit torque, when 350 ft-lb of torque is reached the extension will flex and absorb additional impacts instead of continuing to tighten. Resilient steel, made of durable and resilient chrome molybdenum steel. Calibration free, with a pre-determined maximum allowed torque and no moving parts it is maintenance and recalibration free.
OEMTOOLS 24221 Torque Limiting Extension Set, 10 Piece, 1/2 Drive | Impact Wrench Torque Limiting Extensions Stop Turning When Required Torque Has Been Reached | Multi-Color | Comes in Carrying Case
- Comes in a sturdy blow mold case. Designed for impact use only. Stops turning when the required torque has been reached. Made with flexible chrome moly steel.
Torque Extension Bar Set,Universal 10Pcs 1/2” Drive Color-coded Torque Stick Limiter Extension Bar Set with Carry Case 65-150 Ft/Lbs (90-200Nm)
- 【Special color code】color-coded and engraved with settings for visual confirmation to prevent misapplication use with most impact wrench also with an extended anvil. 【High performance】1/2 drive limiters accurately center on torquing to recommend settings and eliminate impact damage. 【Well built quality】professional manufacturing, high tensile strength and corrosion resistance unused, brand new, a great aftermarket replacement for the stock one. 【Bars range】heavy duty 10 pcs set with case chrome molybdenum steel set includes the following sized bars 65ft-lb (90nm), 75ft-lb (100nm), 80ft-lb (110nm), 90ft-lb (120nm), 100ft-lb (135nm), 110ft-lb (150nm), 120ft-lb (160nm), 130ft-lb (175nm), 140ft-lb (190nm), 150ft-lb (200nm). 【professional design】the torque limiting extension bar features zero-calibration reduces set-up times and increases work efficiency.
Ken-Tool (30228 Torque Extension
- Features note image for illustrative purposes only. ) Made in the u. Tighten nuts to factory specifications each time the wheels are replaced. 30199 and no. A. S. Color and letter coded for quick size and torque reference. Application chart can be wall mounted. Converts any impact gun, including those with an extended anvil, into an instant torque wrench by bleeding torque off the impact gun. 30299 are also available separately. Refer to chart below for specification. 1/2in. Limited limited warranty. (Application charts no. For foreign and domestic cars and light trucks. Drive torquemaster torque extension, dark green (h), 45ft/lbs.
Sunex 5320TE, 1″ Drive, Truck Torque Extension, 250′.lbs., 350 Nm
- Heavy-duty 3/4-inch drive, both male and female ends are 3/4-inch drive for use with heavy-duty impact wrenches and sockets. Flexes to limit torque, when 175 ft-lb of torque is reached the extension will flex and absorb additional impacts instead of continuing to tighten. Calibration free, with a pre-determined maximum allowed torque and no moving parts it is maintenance and recalibration free. Powder coated, powder coated orange for additional corrosion resistance and to easily identify it among other extensions and tools. Resilient steel, made of durable and resilient chrome molybdenum steel. 10-inch extension, torque extension is 10-inches long to allow easy clearance and prevent damage to wheels by a too close impact wrench. Sunex 5320te 1-inch drive 250-feet/pound torque truck extension bar.
Steelman 1/2-Inch Drive 100 ft-lb Torque Extension for Impact Wrench, 8-inch Extension, Corrosion-Resistant Powder-Coated Steel, Gray
- 1/2-inch drive, both male and female ends are 1/2-inch drive for use with heavy-duty impact wrenches and sockets. Calibration free, predetermined maximum allowed torque, no moving parts, maintenance and recalibration free. Flexes to limit torque, when 100 ft-lb of torque is reached the extension will flex to absorb impact and stop tightening. Prevents over-tightening, over-tightening can lead to premature failure of wheels, wheel studs, and rotors. Powder-coated, steel powder-coated gray for corrosion resistance and to differentiate from other extensions.
Ken-Tool (30244 Torque Extension
- Lti tools torque extension, yellow, 65/lbs (loc-1400f). ➤➤Zero-calibration reduces set-up times and increases work efficiency. ➤➤color-coded and engraved with settings for visual confirmation to prevent misapplication. ➤➤Professional manufacturing, high tensile strength and corrosion resistance. Torque ext t 1/2″, 135 ft lb bright green.
STEELMAN 60156 3/4-Inch Drive Yellow 475 ft-lb Torque Extension
- Resilient steel, made of durable and resilient chrome molybdenum steel. Powder coated, powder coated yellow for additional corrosion resistance and to easily identify it among other extensions and tools. Prevent over-tightening, prevent over-tightening that can lead to premature failure of wheels, wheel studs, and rotors. Calibration free, with a pre-determined maximum allowed torque and no moving parts it is maintenance and recalibration free. 10-inch extension, torque extension is 10-inches long to allow easy clearance and prevent damage to wheels by a too close impact wrench. Flexes to limit torque, when 475 ft-lb of torque is reached the extension will flex and absorb additional impacts instead of continuing to tighten. Heavy-duty 3/4-inch drive, both male and female ends are 3/4-inch drive for use with heavy-duty impact wrenches and sockets.
Neiko 02450A 1/2″ Drive Torque Limiting Extension Bar Set, Cr-Mo Steel | 5-Piece Set | 65 to 140 Ft-Lbs (90 to 190 Nm)
- Set includes storage case and five 1/2-inch drive impact torque limiting extension bars ranging from 65 foot-pounds (90 newton meters) to 140 foot-pounds (190 nm) of torque. Male end features spring-loaded ball to secure sockets, and ball hole at drive end to lock onto impact tool drive tangs to prevent dropping during operation. Each stick is color-coded with engraved torque limit specifications for easy identification. Torque limiters are constructed of premium impact grade chrome molybdenum steel for heavy duty use with impact drivers. Half-inch drive size is compatible with impact drivers to limit torque consistently and accurately to prevent lug nuts and fasteners from over-torquing.
Ken-Tool (30227 Torque Extension
- 1/2″ drive torque extension ll 175 ft/lb, fuchsia. Unused, brand new, a great aftermarket replacement for the stock one. 1/2 drive limiters accurately center on torquing to recommend settings and eliminate impact damage. Color-coded and engraved with settings for visual confirmation to prevent misapplication. Please check the set carefully before ordering to make a purchase.
Ken-Tool (30229 Torque Extension
- Heavy-duty 3/4-inch drive, both male and female ends are 3/4-inch drive for use with heavy-duty impact wrenches and sockets. Powder coated, powder coated green for additional corrosion resistance and to easily identify it among other extensions and tools. Prevent over-tightening, prevent over-tightening that can lead to premature failure of wheels, wheel studs, and rotors. 10-inch extension, torque extension is 10-inches long to allow easy clearance and prevent damage to wheels by a too close impact wrench. Flexes to limit torque, when 400 ft-lb of torque is reached the extension will flex and absorb additional impacts instead of continuing to tighten. 1/2″ drive torque extension i 120. Calibration free, with a pre-determined maximum allowed torque and no moving parts it is maintenance and recalibration free.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
