Proto, J1248B, Combination Wrench, SAE, 1-1/2in Size
- , Offset 15 degrees, head angle 15 degrees, alloy steel, meets/exceeds asme b107. Combination wrench item, sae, size 11/32 in. 100, features non-reflective black oxide finish is used where non-plated products are required, anti-slip design open end reduces wear on fasteners, box end incorporates torqueplus design to reduce fastener wear, 15 degree offset box end keeps wrench clear of obstructions. , 12, finish black oxide, standard tool(accessory needed for tethering), overall length 5-39/64 in.
Proto, J1209EFS, Combination Wrench, SAE, 9/32in Size
- , 12, finish black oxide, standard tool(accessory needed for tethering), overall length 28 in. , offset 15 degrees, head angle 15 degrees, alloy steel, meets/exceeds federal ggg-w-636e, features non-reflective black oxide finish is used where non-plated products are required, anti-slip design open end reduces wear on fasteners, box end incorporates torqueplus design to reduce fastener wear, 15 degree offset box end keeps wrench clear of obstructions. Combination wrench item, sae, size 1-7/8 in.
Pro Tie 33864 Heavy Duty All Stainless Bulk Hose Clamps, SAE Size 56, Range 3-1/6-Inch-4-Inch, Box of 70
- Pro tie bulk heavy duty hose clamps are 100% stainless steel hose clamps in a larger cut-open retail ready box. All hose clamps have upc’s for individual sale.
Scandvik 08134037045 Stainless Steel Hose Clamp (SAE Size 28, 32-57 mm, 1 2 1/4″, 12mm Band, 13657), 10 Pack
- All parts are made of 316 stainless steel. The rolled up band edges of the aba clamps prevent it from cutting into the hose and forming such a smooth transition between the edge of the band and the hose that crack formation and fractural impressions are avoided. The 6 degree thread pitch angle not only gives you a completely vibration-proof clamp but also a clamp which grips the hose more firmly all the way around without calling for more force on the screwdriver. The threads are specially stamped and leave the inside of the clamp completely smooth. Since the radius of each housing is carefully adapted to the relevant hose diameter and due to the smooth transition between housing and band, extremely good compatibility with the shape of the hose is achieved. The intact grain structure increases the strength reserve of the clamp and enables you to use an aba clamp up to ten times. The smooth inside of the band eliminates friction between the hose and the band, thus the clamp will seal 360 degrees around. The square threads of the screw are rolled and those on the band stamped by a special process. Thread engagement gives strength and reliability. Aba 316 stainless steel hose clamps are the perfect choice for applications where premium corrosion resistance is required. Consequently even inexpensive hoses last longer. The all pressed worm housing increases the strength of the hose clamp by 30%.
Proto, J1248, Combination Wrench, SAE, 1-1/2in Size
- , 12, finish black oxide, standard tool(accessory needed for tethering), overall length 3-1/4 in. 100, features non-reflective black oxide finish is used where non-plated products are required, anti-slip design open end reduces wear on fasteners, box end incorporates torqueplus design to reduce fastener wear, 15 degree offset box end keeps wrench clear of obstructions. Combination wrench item, sae, size 1/4 in. , offset 15 degrees, head angle 15 degrees, alloy steel, meets/exceeds asme b107.
Pack of 20 Breeze Power-Seal Stainless Steel Hose Clamp Worm-Drive SAE Size 4 7/32 Inch to 5/8 Inch Diameter
- This 1/2-inch sae set includes 14 sizes 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 in. Extra deep broach enables access to full length of fasteners, specially for lug nuts where shallow sockets do not work. Breeze stainless steel 3504 hose clamps pack of 20 industrial, marine automotive, agricultural, plumbing, lawn & garden superior corrosion resistance heavy duty construction made in the usa. Each socket contains ball hole for secure lock onto drive tang of impact wrenches. Made from high strength alloy steel with black electroplate finish for corrosion and oil resistance.
WORKPRO W003020A 52-Piece Hand Tool & Socket Set (Metric & SAE Size, 3/8″ Drive)
- Ratchet handle 1pc ratchet spinner disk 1pc 3″ ratchet extension bar 1pc 3/8″ to 1/4″ dr. Set includes 1pc 6″long nose pliers 1pc 6″diagonal pliers 1pc 6″adjustable wrench 1pc 5″locking pliers 9pc folding hex key5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″ 1pc 3/8″ dr. 5,7,7. 5,6,6. Sockets(8pt)1/4″,5/16″,3/8″ 4pc 3/8″dr. 5,8,9,10,11,12,13mmsae5/32″,3/16″,7/32″,1/4″,9/32″,5/16″,11/32″,3/8″,13/32″,7/16″,15/32″,1/2″,17/32″,9/16″ 3pc 1/4″dr. Adapter 28pc 1/4″dr. 5,5,5. Sockets,metric14,15mm,sae5/8″,11/16″. Sockets, metric4,4.
Allen Wrench – Hex Key (HUGE SET OF 36 WRENCHES WITH BALL END) Metric & SAE Sizes in Both Long & Short Arm
- Lifetime guarantee. Perfect addition to any garage and home. Super complete 36 pieces set -18 metric and 18 sae sizes in both long and short arms versions. Carbon steel construction made to last. Size marking in wrench and storage case practical.
Big Gator Tools BGT V-Drill 3 Pack V-DrillGuides – SAE / Metric Sizes Set
- Automatically squares up the drill with the surface. Centers the holes on pipes, dowels & outside corners. Non-plated material with light oil coating to prevent rust. Flat side allow 90° drilling into flat surfaces-just clamp and drill. Special nickel alloyed steel heat treated for durability,.
14-Piece Premium Extra Long Large Size SAE Inch Combination Wrench Set, Fractional Sizes from 3/8″ up to 1-1/4″ with Roll-up Pouch | Chrome Vanadium Steel, Mirror Chrome Finish, Unique V-Groove Design
- ▲ Premium material, high strength chrome vanadium steel construction with rust preventative mirror chrome finish insures durability and exceeds ansi b1076 quality standards. ▲ Easy to use, 12-point box end doubles the access angle than a 6-point, and 15-degree offset creates clearance for hand or obstructions in tight work spaces. ▲ V-groove open end, specially engineered “v”-cut open end grips four sides of fasteners to deliver maximum torque and prevents fastener corners from rounding off. ▲ complete size coverage, set includes all common sae standard fractional sizes from 3/8 to 1-1/4 with a roll up storage pouch 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 inch. ▲ Long pattern design, longer wrench body than other brands provides better leverage performance and makes your job easier to loosen stubborn or rusted bolt and nut.
Proto, J1264B, Combination Wrench, SAE, 2in Size
- Combination wrench item sae size 5/16 in 6 finish full polish standard tool(accessory needed for tethering) overall length 5-7/16 in offset 15 degrees head angle 15 degrees alloy steel meets/exceeds asme b107 100 features anti-slip design open end reduces wear on fasteners full polish finish provides corrosion resistance and easy to clean surfaces box end incorporates torqueplus design to reduce fastener wear 15 degree offset box end keeps wrench clear of obstructions.
Proto, J1216ASD, Combination Wrench, SAE, 1/2in Size
- , 12, finish black oxide, standard tool(accessory needed for tethering), overall length 17-5/8 in. Combination wrench item, sae, size 1-5/16 in. , offset 15 degrees, head angle 15 degrees, alloy steel, meets/exceeds federal ggg-w-636e.
KSEIBI 201760 8-Piece Folding Allen Hex Key Wrench Set, SAE Size
- 40% stronger than steel handles, and will not rust or corrode. Patented flutes allow for easy selection of one tool at a time. Sizes include 5/64″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ and 5/16″. Flip and turn feature eliminates need to reposition tool on screw head. Moulded in 90 degree stop converts the tool into a time saving speed wrench.
Max Torque 15-Piece Premium Combination Wrench Set, Complete SAE Inch Sizes from 1/4″ to 1″ with Rack Organizer | Chrome Vanadium Steel, Long Pattern, Mirror Chrome Finish
- ▲ Complete size coverage, set includes every sae standard sizes from 1/4 to 1 inch with a storage rack 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in. ▲ Easy to use, 12-point box end doubles the access angle than a 6-point, and 15-degree offset creates clearance for hand or obstructions in tight work spaces. ▲ Long pattern design, longer wrench body than other brands provides better leverage performance and makes your job easier to loosen stubborn or rusted bolts and nuts. ▲ v-cut open end, specially engineered “v”-cut open end grips four sides of fasteners to deliver maximum torque and prevents fastener corners from rounding off. ▲ Premium material, high strength chrome vanadium steel construction with rust preventative mirror chrome finish ensures durability and exceeds ansi b1076 quality standards.
Big Gator Tools STD Series 3PC V-Drill Guide w/35 SAE Hole Sizes 1/8″ – 5/8″ 3PC Set
- Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces round stock hole alignment marks on one side. Prevents drill bit wander portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, pegboard-friendly. Automatically squares up the drill with the surface alignment marks on both sides, to line up on center. Includes (1) std500np, (1) std1000dgnp & (1) std2000dgnp special nickel alloyed steel heat treated for durability non-plated material with light oil coating to prevent rust. Centers the holes on pipes, dowels & outside corners flat side allow 90° drilling into flat surfaces-just clamp and drill.
Scandvik 08134037032 Stainless Steel Hose Clamp (SAE Size 16, 26-38 mm, 1 1/16″ – 1 1/2″, 12mm Band, 13638), 10 Pack
- Since the radius of each housing is carefully adapted to the relevant hose diameter and due to the smooth transition between housing and band, extremely good compatibility with the shape of the hose is achieved. The threads are specially stamped and leave the inside of the clamp completely smooth. The all pressed worm housing increases the strength of the hose clamp by 30%. The square threads of the screw are rolled and those on the band stamped by a special process. The rolled up band edges of the aba clamps prevent it from cutting into the hose and forming such a smooth transition between the edge of the band and the hose that crack formation and fractural impressions are avoided. Aba 316 stainless steel hose clamps are the perfect choice for applications where premium corrosion resistance is required. The intact grain structure increases the strength reserve of the clamp and enables you to use an aba clamp up to ten times. Consequently even inexpensive hoses last longer. The 6 degree thread pitch angle not only gives you a completely vibration-proof clamp but also a clamp which grips the hose more firmly all the way around without calling for more force on the screwdriver. All parts are made of 316 stainless steel. Thread engagement gives strength and reliability. The smooth inside of the band eliminates friction between the hose and the band, thus the clamp will seal 360 degrees around.
Proto, J1210A, Combination Wrench, SAE, 5/16in Size
- , 12, finish black oxide, standard tool(accessory needed for tethering), overall length 23 in. , Offset 15 degrees, head angle 15 degrees, alloy steel, meets/exceeds federal ggg-w-636e, features non-reflective black oxide finish is used where non-plated products are required, anti-slip design open end reduces wear on fasteners, box end incorporates torqueplus design to reduce fastener wear, 15 degree offset box end keeps wrench clear of obstructions. Combination wrench item, sae, size 1-5/8 in.
Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 44, 2-5/16″ to 3-1/4″ Diameter Range, 1/2″ Bandwidth (Pack of 10)
- This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in united states.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
