OTC (5303) Stinger 3 Ton Hydraulic Service Jack
- Light, compact design makes it easy and convenient to use. Built-in safety overload system prevents use beyond the rated capacity. A flanged upper body edge increases strength to resist twisting. 3 ton capacity with a lifting range of 5-3/4 inches to 18-1/2 inches. Rear swivel casters for easy maneuvering and positioning.
OTC 1512 Stinger 20-Ton Service Jack
- Otc stinger 20-ton service jack low-profile stance and extended height add to versatility. The counter-balanced spring-assisted handle has a three-position lock. Either the foot pedal or jack handle may be used for pumping action. Its wheels and swivel casters feature internal bearings.
OTC 4504 Stinger ISO Bubble Flaring Tool Kit
- Housed in a blow-molded storage case. Includes four dies 475 6 8 and 10 mm. Flaring bar and all the adapters needed for iso bubble flaring. Forged yoke is made of heat-treated steel. Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems.
OTC 4542 Stinger Wheel Bearing Locknut Socket Set – 7 Piece
- It is similar to ford no. 519097-6, 2-3/8 inch rounded hex locknut socket works on 1990-newer ford rangers, bronco iis, and explorers with automatic locking hubs. 2-1/ 2 inch hex locknut socket fits the hex nut found on rear axles and various front axle applications on light-duty trucks. 2-3/4 inch rounded hex locknut socket works on 3/4-ton and 1-ton ford f-250 and f-350 trucks with automatic locking hubs. 205-348 (t95t-1197-a). Set contains 55 mm hex locknut socket is designed for use on front wheel adjusting nuts found on toyota models fj ln and rn. It is similar to ford no. No. Otc stinger wheel bearing locknut socket set, 7 piece 7-piece wheel bearing locknut socket set for use with 1/ 2 inch ratchet or breaker bar. 205-349 (t95t-1197-b). 2-1/ 2 inch rounded hex locknut socket works on 1995-96 ford f-150 trucks and full-sized broncos with automatic locking hubs. It is similar to ford no. 205-040 (t70t-4252-b). 2-3/8 inch hex locknut socket works on 1984-92 ford rangers and bronco iis with automatic locking hubs. 2-9/16 inch rounded hex locknut socket works on 1990-93 dodge trucks with dana 60 manual hubs.
OTC (9314) Stinger 12 Ton Short Bottle Jack
- Chrome piston pump and ram for additional rust resistance. Includes free seal kit for extended product life. In-line design for increased ease of use in positioning and operation. Forged base and cylinder to ensure strength and eliminate leaks. Minimum height 7-1/16 inches with a maximum height of 13-5/8 inches.
OTC 4522 Stinger Vacuum Hose and Fuel Line Removal Tool
- Otc stinger vacuum hose and fuel line removal tool is designed to remove vacuum hose or fuel lines (3/16 inch to 1/ 2 inch) from fittings or tubing. Then use the silver jaw to push the vacuum hose or fuel line off the fitting or tube. Simply place the black jaw on the fitting or tubing, the jaw will grip the material.
OTC 4485 Stinger Spot Weld Cutter Set
- Otc stinger spot weld cutter set is used with electric drill or air drill to cut 5/16 inch and 3/8 inch spot welds. Cutter bits have cutting teeth on each end. The kit s consists of 3 each 5/16 inch cutter bits, 3 each 3/8 inch cutter bits, and 4 each centering tips.
OTC 4496 Stinger Hose Clamp Plier Set – 6 Piece
- Otc stinger hose clamp pliers set, 6 piece five different styles of hose clamp pliers which will service most flat-band and ring-style hose clamps and a hose removal tool. The set contains straight hose clamp pliers set hose removal tool flat-type hose clamp pliers offset hose clamp pliers and a 45 degree hose clamp pliers.
OTC (5372) Stinger 3 Ton Jack Stands – Pair
- A self-locking ratchet handle cannot be released under load. These stands are factory tested before shipment, and have welded foot pads that resist sinking into soft ground or asphalt. The stands also conform to ansi pald load rating standard. A durable baked enamel finish resists corrosion. Made with a formed and welded steel base for strength.
OTC 4720 Stinger CV Boot Clamp Plier for Chrysler
- Boots found on various chrysler plymouth and dodge front-wheel drive vehicles. C. N. It prevents damage to cv boot and clamp during installation. And g. K. Otc stinger cv boot clamp pliers for chrysler required tool for correct installation of strap-and-buckle style cv boot clamps. It works on a. I.
OTC 4503 Stinger Double Flaring Tool Kit
- Designed for double or single flare in copper aluminum soft steel brake line and brass tubing. Chrome swivel is made of alloy steel and reduces friction. Housed in a blow-molded storage case. Forged yoke is made of heat-treated steel. Includes five adapters covering 3/16 inch through 1/2 inch and 48 mm through 127 mm.
OTC 4512 Stinger Internal And External 8 Piece Snap-Ring Pliers Set
- The otc stinger internal and external snap-ring pliers kit is made of heavy-gauge tempered steel for long life and durability. The kit includes a 4512-1 090 inch tip straight pliers, 4512-2 090 inch tip 90 degree pliers, 4512-3 070 inch tip straight pliers, 4512-4 070 inch tip 90degree pliers, 4512-5 047 inch tip straight pliers, 4512-6 047 inch tip 90degree pliers, 4512-7 038 inch tip straight pliers, 4512-8 038 inch tip 90degree pliers, 4512-9 straight tip pick and a 4512-10 90degree tip pick all contained in a blow-molded plastic storage case.
OTC 4524 Stinger 45° Hose Clamp Plier
- It works on most flat-band hose clamps. Otc stinger 45 degree hose clamp pliers jaws are bent at a 45 degree angle and pliers tips swivel to allow easy access to confined areas. A ratchet lock mechanism holds jaws open.
OTC 4565 Stinger 2-7/8″ to 3-1/4″ Swivel Handle Oil Filter Wrench
- Swivel handle oil filter wrench. Features a 1 inch wide stainless steel band for positive grip on the filter. Fits filters ranging from 2-7/8 inch to 3-3/8 inch in diameter. Swivel handle makes it easy to turn filters in hard-to-reach areas.
OTC (5302) Stinger 2-1/4 Ton Hydraulic Service Jack
- Built-in safety overload system prevents use beyond the rated capacity. 2-1/4 ton capacity with a lifting range of 5 inches to 18 inches. A flanged upper body edge increases strength to resist twisting. Rear swivel casters for easy maneuvering and positioning. Light, compact design makes it easy and convenient to use.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
