Scandvik 08116112014 Stainless Steel Hose Clamp (SAE Size 4, 11-17 mm, 7/16″ – 11/16″, 9mm Band, 13617), 10 Pack
- The intact grain structure increases the strength reserve of the clamp and enables you to use an aba clamp up to ten times. The threads are specially stamped and leave the inside of the clamp completely smooth. The 6 degree thread pitch angle not only gives you a completely vibration-proof clamp but also a clamp which grips the hose more firmly all the way around without calling for more force on the screwdriver. Consequently even inexpensive hoses last longer. Aba 316 stainless steel hose clamps are the perfect choice for applications where premium corrosion resistance is required. The square threads of the screw are rolled and those on the band stamped by a special process. Since the radius of each housing is carefully adapted to the relevant hose diameter and due to the smooth transition between housing and band, extremely good compatibility with the shape of the hose is achieved. The smooth inside of the band eliminates friction between the hose and the band, thus the clamp will seal 360 degrees around. Thread engagement gives strength and reliability. The rolled up band edges of the aba clamps prevent it from cutting into the hose and forming such a smooth transition between the edge of the band and the hose that crack formation and fractural impressions are avoided. The all pressed worm housing increases the strength of the hose clamp by 30%. All parts are made of 316 stainless steel.
WORKPRO W003020A 52-Piece Hand Tool & Socket Set (Metric & SAE Size, 3/8″ Drive)
- 5,5,5. Ratchet handle 1pc ratchet spinner disk 1pc 3″ ratchet extension bar 1pc 3/8″ to 1/4″ dr. 5,6,6. Set includes 1pc 6″long nose pliers 1pc 6″diagonal pliers 1pc 6″adjustable wrench 1pc 5″locking pliers 9pc folding hex key5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″ 1pc 3/8″ dr. Sockets, metric4,4. Adapter 28pc 1/4″dr. Sockets,metric14,15mm,sae5/8″,11/16″. 5,7,7. Sockets(8pt)1/4″,5/16″,3/8″ 4pc 3/8″dr. 5,8,9,10,11,12,13mmsae5/32″,3/16″,7/32″,1/4″,9/32″,5/16″,11/32″,3/8″,13/32″,7/16″,15/32″,1/2″,17/32″,9/16″ 3pc 1/4″dr.
Neiko 02440A 3/8″ Drive Impact Socket Set, 44 Piece Deep and Shallow Assortment | Standard SAE and Metric Sizes (5/16-Inch to 3/4-Inch and 8-19 mm) | Cr-V Steel
- Laser etched markings on corrosion resistant black phosphate finish easily identifies drive socket specs and measurements. 6-point hex socket design prevents round-off deterioration under high torque and hammering stress when used with impact and electric wrenches against fasteners. Sturdy and strong blow molded case features socket size labels for organized storage and is secured by two lever locks. Set includes 3″ and 6″ drive impact extension bar, 3/8″ universal joint, 1/2″ to 3/8″ reducer and the following socket sizes sae | deep 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 (inches) standard 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 (inches) | metric sizes | deep 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 (millimeter) standard 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 (millimeter). Material is made of heavy duty drop-forged premium chrome vanadium steel to resist corrosion and absorb extreme levels of torque changes.
SATA 21-Piece Pass-Thru Socket Set, 3/8-Inch Drive Metric/SAE Sizes, with a Professional Pass-Thru Design and a Black Storage Case – ST09134SJ
- [Unparalleled access] ratchet made 50% thinner than conventional ratchets and 40% stronger by eliminating the drive tang. [Useful accessories] pass-thru ratchet set also includes a 3-inch extension and two quick-release adaptors. [storage case] entire set can be stored or transported in a black plastic blow molded storage. [Complete set] set contains 10 metric (10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm) and 7 sae (3/8, 7/16, 1/2, 5/8, 9/16, 11/16 and 3/4-inch) pass-thru sockets. [Pass-thru design] innovative pass-thru style ratchet and sockets fit down any length of threaded rods.
Scandvik 08134037020 Stainless Steel Hose Clamp (SAE Size 8, 15-24 mm, 5/8″ – 1″, 12mm Band, 13624), 10 Pack
- The rolled up band edges of the aba clamps prevent it from cutting into the hose and forming such a smooth transition between the edge of the band and the hose that crack formation and fractural impressions are avoided. The 6 degree thread pitch angle not only gives you a completely vibration-proof clamp but also a clamp which grips the hose more firmly all the way around without calling for more force on the screwdriver. The square threads of the screw are rolled and those on the band stamped by a special process. All parts are made of 316 stainless steel. The intact grain structure increases the strength reserve of the clamp and enables you to use an aba clamp up to ten times. The threads are specially stamped and leave the inside of the clamp completely smooth. Thread engagement gives strength and reliability. Aba 316 stainless steel hose clamps are the perfect choice for applications where premium corrosion resistance is required. The all pressed worm housing increases the strength of the hose clamp by 30%. The smooth inside of the band eliminates friction between the hose and the band, thus the clamp will seal 360 degrees around. Consequently even inexpensive hoses last longer. Since the radius of each housing is carefully adapted to the relevant hose diameter and due to the smooth transition between housing and band, extremely good compatibility with the shape of the hose is achieved.
Pit Posse Pp2880 Motorcycle Roll Up Repair Tool Bag Set Kit American SAE Size Cruiser Hd V-Twin Pp2880
- ✅ kit contains zip ties, air pressure gauge, and storage pouch. ✅ Kit contains 2-in-1 spark plug socket, locking pliers, and led flashlight. ✅ Assorted high-quality essential tools and accessories that will handle 90% of your roadside hd/v-twin bike emergencies and maintenance work. ✅ Kit contains 3/8″, 7/16″, 1/2″, 9/16″, 10mm wrenches, adjustable wrench, 6-in-1 screwdriver. ✅ Kit contains 10 piece sae hex set t25, t27, t40 torx keys.
Proto, J1264B, Combination Wrench, SAE, 2in Size
- Combination wrench item sae size 5/16 in 6 finish full polish standard tool(accessory needed for tethering) overall length 5-7/16 in offset 15 degrees head angle 15 degrees alloy steel meets/exceeds asme b107 100 features anti-slip design open end reduces wear on fasteners full polish finish provides corrosion resistance and easy to clean surfaces box end incorporates torqueplus design to reduce fastener wear 15 degree offset box end keeps wrench clear of obstructions.
Koehler Enterprises KE36SS Hose Clamp Blister Pack, 2 Piece (Size SAE 36)
- Ideal for automotive, home maintenance, plumbing, industrial and marine applications. Sae size 36, clamping range from 1 -3/4 inches to 2, 3/4 inches (4,6 to 6,98 cm). Versatile and easy to use and maintain. Suitable for virtually any clamping application. 300 series stainless steel band provides maximum corrosion resistance to salt and most chemicals.
Neiko 02476A 1/2″ Drive Deep Impact Socket Set, 14 Piece | 6 Point Standard SAE Sizes (3/8-Inch to 1-1/14″) | Cr-V Steel
- Innovative 6-point flank drive design grips fastener more tightly on the flat sides and prevents rounding off at corners. Permanent high visibility laser etched size marking on each socket for quick size selection, even in dim garages and shops. 14 pieces deep broach standard sockets come in a heavy duty custom case with size index for easy storage 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 inch. Premium black phosphate coating provides maximum protection from rust and corrosion than traditional black oxide finish. High strength impact grade chrome vanadium steel sockets withstand more torque from impact tools and insure longevity.
Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 44, 2-5/16″ to 3-1/4″ Diameter Range, 1/2″ Bandwidth (Pack of 10)
- This product is manufactured in united states. This is easy to use and easy to install. This product is high quality product and highly durable.
Flexzion Hex Key Wrench 30 PC Combo Set SAE/MM Metric Size Wrenches Long Short Arm Functional Hand Tools with a Neat Blow Mold Case for Storage
- Hinged storage case opens flat, making it easier to get wrenches in and out. Precisely-sized, chamfered ends insert smoothly into fastener head, reducing wear. High visibility sizes marked on case for fast size selection great addition to any toolbox includes hard to find sizes. Includes sae sizes from 035″ up to 3/8″, includes metric sizes from 0 7mm up to 10 0mm. Allen wrench set w/sae & metric size allen wrenches heat treated carbon steel with black-oxide finish.
LOGGERHEAD Bionic Wrench – Model: 8 SIZE: (6) SAE sizes: 7/16″, 1/2″, 9/16″,5/8″, 11/16″, 3/4″,(10) Metric sizes: 11, 12, 13, 14,15, 16, 17, 18, 19, 20mm
- Thin wall sockets fit into most lug nut openings. Large wraparound color-coded sizing is easy to identify even in low light conditions. Premium chrome molybdenum steel tempered with our proprietary heat treatment process to withstand more torque from power tools. 6-point wavedrive design grips fasteners more tightly than traditional design, preventing fastener rounding and giving you more leverage. Three heavy duty impact flip sockets cover six most commonly used lug nut sizes 17 mm, 19 mm, 21 mm, 3/4 in, 13/16 in, and 7/8 in.
Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 6, 7/16″ to 25/32″ Diameter Range, 1/2″ Bandwidth (Pack of 10)
- This product is manufactured in united states. This product is high quality product and highly durable. This is easy to use and easy to install.
Big Gator Tools STD Series 3PC V-Drill Guide w/35 SAE Hole Sizes 1/8″ – 5/8″ 3PC Set
- Centers the holes on pipes, dowels & outside corners flat side allow 90° drilling into flat surfaces-just clamp and drill. Includes (1) std500np, (1) std1000dgnp & (1) std2000dgnp special nickel alloyed steel heat treated for durability non-plated material with light oil coating to prevent rust. Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces round stock hole alignment marks on one side. Automatically squares up the drill with the surface alignment marks on both sides, to line up on center. Prevents drill bit wander portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, pegboard-friendly.
KSEIBI 201760 8-Piece Folding Allen Hex Key Wrench Set, SAE Size
- Sizes include 5/64″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ and 5/16″. 40% stronger than steel handles, and will not rust or corrode. Flip and turn feature eliminates need to reposition tool on screw head. Moulded in 90 degree stop converts the tool into a time saving speed wrench. Patented flutes allow for easy selection of one tool at a time.
36 Piece Allen Wrench Set – Allen Wrenches/Hex Key Set in Metric & SAE Sizes
- Easy entry, ball-end hex wrench design allows for easy use in hard to reach spots giving you a wider angle of entry around obstructing objects. Organized case, includes hard plastic carry case for easy storage, and labeled with sizes to help you quickly find a allen wrench for any job. Lifetime replacement warranty, iron forge tools stands behind all of its products 100% if anything ever goes wrong with this, we will replace it with a new item. Superior durability, this allen key set is made of cv steel for superior stealth and maximum torque allowing you to tackle any job. 36-piece allen wrench set, this hex key set comes in both imperial and metric sizes, for use with multiple hex head screws or bolts.
Proto, J1248, Combination Wrench, SAE, 1-1/2in Size
- Combination wrench item, sae, size 1/4 in. , offset 15 degrees, head angle 15 degrees, alloy steel, meets/exceeds asme b107. 100, features non-reflective black oxide finish is used where non-plated products are required, anti-slip design open end reduces wear on fasteners, box end incorporates torqueplus design to reduce fastener wear, 15 degree offset box end keeps wrench clear of obstructions. , 12, finish black oxide, standard tool(accessory needed for tethering), overall length 3-1/4 in.
Scandvik 08134037077 Stainless Steel Hose Clamp (SAE Size 48, 64-89 mm, 2 3 1/2″, 12mm Band, 13689), 10 Pack
- The threads are specially stamped and leave the inside of the clamp completely smooth. Aba 316 stainless steel hose clamps are the perfect choice for applications where premium corrosion resistance is required. Consequently even inexpensive hoses last longer. All parts are made of 316 stainless steel. The rolled up band edges of the aba clamps prevent it from cutting into the hose and forming such a smooth transition between the edge of the band and the hose that crack formation and fractural impressions are avoided. The 6 degree thread pitch angle not only gives you a completely vibration-proof clamp but also a clamp which grips the hose more firmly all the way around without calling for more force on the screwdriver. The smooth inside of the band eliminates friction between the hose and the band, thus the clamp will seal 360 degrees around. The intact grain structure increases the strength reserve of the clamp and enables you to use an aba clamp up to ten times. The all pressed worm housing increases the strength of the hose clamp by 30%. Thread engagement gives strength and reliability. Since the radius of each housing is carefully adapted to the relevant hose diameter and due to the smooth transition between housing and band, extremely good compatibility with the shape of the hose is achieved. The square threads of the screw are rolled and those on the band stamped by a special process.
Koehler Enterprises EZ01B EZ Clamp Blister Pack, (2 Pieces Each SAE Size 4, 6 and 20. No Tools Required)
- Size sae 4, 6 and 20, with overall clamping range from 1/4 inches to 1-3/4 inches (7 to 44 mm). Ideal for installation in tight-fitting or hard to reach places. Versatile and easy to use and maintain. Suitable for a variety of applications for home, auto and industrial uses. Stainless steel band provides maximum corrosion resistance to salt and most chemicals.
Scandvik 08134037070 Stainless Steel Hose Clamp (SAE Size 44, 57-83 mm, 2 3 1/4″, 12mm Band, 13683), 10 Pack
- The intact grain structure increases the strength reserve of the clamp and enables you to use an aba clamp up to ten times. The 6 degree thread pitch angle not only gives you a completely vibration-proof clamp but also a clamp which grips the hose more firmly all the way around without calling for more force on the screwdriver. The smooth inside of the band eliminates friction between the hose and the band, thus the clamp will seal 360 degrees around. Thread engagement gives strength and reliability. The all pressed worm housing increases the strength of the hose clamp by 30%. Consequently even inexpensive hoses last longer. Since the radius of each housing is carefully adapted to the relevant hose diameter and due to the smooth transition between housing and band, extremely good compatibility with the shape of the hose is achieved. The threads are specially stamped and leave the inside of the clamp completely smooth. The square threads of the screw are rolled and those on the band stamped by a special process. The rolled up band edges of the aba clamps prevent it from cutting into the hose and forming such a smooth transition between the edge of the band and the hose that crack formation and fractural impressions are avoided. All parts are made of 316 stainless steel. Aba 316 stainless steel hose clamps are the perfect choice for applications where premium corrosion resistance is required.
Neiko 03574A Jumbo Combination Wrench Set, 16 Piece | Raised Panel Construction | 1/4 to 1-1/4-Inch SAE Sizes
- High quality fabric holder keeps tools neatly organized in individual pockets and can be rolled up to fit inside a toolbox, as a portable carrying case or hung onto a garage wall for easy grab. Drop forged, industrial strength steel provides strong leverage and black oxide coating provides durability for maximum strength and tough torque. Precision machined wrench features a 15-degree angled offset open end and 12 point chamfered box end to tighten/ loosen nuts and bolts. Panel design adds strength to the wrench shaft to withstand rigorous use for high endurance. Jumbo wrench comes in a wide variety of sizes for multiple applications sizes include 1/4″ to 1-1/4″.
ATD Tools 99750 4-Piece 8 SAE Size X-Large Ratcheting Wrench Set
- 180 degree flex feature and extra-long reach allows access to hard-to-reach places. Offset box end gear provides more surface contact and access to recessed fasteners. 72-tooth ratcheting system for high torque and 5 degree swing arc for operation in tight areas. Sliding switch button for quick change ratcheting direction. 8 sae sizes 5/16 inch through 3/4 inch.
Allen Wrench Hex Key Set (10 WRENCHES – INDUSTRIAL GRADE) SAE Sizes 1/16-3/8 – Carbon Steel Construction with Black Finish
- Convent key ring, never lose a wrench again, convenient key ring keeps all the wrenches together. 10 piece sae hex key (allen wrench) set, 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8. 100% manufacturer money back guarantee, tarvol guarantees all of it’s products and tools for life. Perfect for any allen wrench or hex key project, including bikes, tool projects, building, furniture, & more. Carbon strenth steel, heavy duty in black oxide finish.
Proto, J1248B, Combination Wrench, SAE, 1-1/2in Size
- , Offset 15 degrees, head angle 15 degrees, alloy steel, meets/exceeds asme b107. , 12, finish black oxide, standard tool(accessory needed for tethering), overall length 5-39/64 in. 100, features non-reflective black oxide finish is used where non-plated products are required, anti-slip design open end reduces wear on fasteners, box end incorporates torqueplus design to reduce fastener wear, 15 degree offset box end keeps wrench clear of obstructions. Combination wrench item, sae, size 11/32 in.
Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 48, 2-9/16″ to 3-1/2″ Diameter Range, 1/2″ Bandwidth (Pack of 10)
- This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in united states.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
