Best 23 Wheel Bearing Lock Nuts

 

OEMTOOLS 25476  3-14 Inch Truck Wheel Bearing Locknut Socket

OEMTOOLS 25476 3-1/4 Inch Truck Wheel Bearing Locknut Socket

OEMTOOLS 25476 3-1/4 Inch Truck Wheel Bearing Locknut Socket - Eye catching red color serves as a reminder to remove the clamp before closing. A long extension may be used to provide necessary clearance. 3-1/4 in truck wheel bearing locknut wrench, 6-point. Sockets are constructed with high-grade steel for added strength.

 

OTC 1941 Wheel Bearing Locknut Socket

OTC 1941 Wheel Bearing Locknut Socket

OTC 1941 Wheel Bearing Locknut Socket - Easy to use. Wheel bearing locknuts are easy to remove or install with the help of these specially designed sockets. The high quality, and strength of the steel allows for the resistant of rounding out. To find the correct size, just measure the locknuts from flat to flat. This is a very handy to have.

 

Supercrazy 7PCS Wheel Bearing Locknut Socket Set SF0117

Supercrazy 7PCS Wheel Bearing Locknut Socket Set SF0117

Supercrazy 7PCS Wheel Bearing Locknut Socket Set SF0117 - 2-3/4″ (ford f/250 and 350 trucks). Includes heavy duty blow molded case. 2-9/16″ (dodge trucks). 2-1/2″ (for ford f/150 and full-size broncos). 2-3/8″ rounded hex (recent ford rangers & bronco). Ln & rn). 2-3/8″ hex (for early ford rangers & bronco). Set includes 55mm (for toyota fj.

 

Sunex 10602 2-916 6-Point Wheel Bearing Locknut

Sunex 10602 2-9/16 6-Point Wheel Bearing Locknut

Sunex 10602 2-9/16 6-Point Wheel Bearing Locknut - This wheel bearing locknut socket is for use with 1/2-inch ratchet or breaker bar. For those jobs that require a specialized tool, look no further than sunex tools specialty application sockets.

 

CTA Tools 4155 FordGM Wheel Bearing Locknut Socket

CTA Tools 4155 Ford/GM Wheel Bearing Locknut Socket

CTA Tools 4155 Ford/GM Wheel Bearing Locknut Socket - Inner diameter 2-1/4-inches and outer diameter 2-5/8-inches. Overall length 3-1/16-inches and inside depth 2-1/2-inches. Use with 1/2-inch drive tools. Applications ’78-’84 ford f-series heavy-duty 3/4 and 1-ton 4wd trucks, ’73-’81 gm 3/4 and 1-ton 4wd trucks. 6-lug type socket.

 

CTA Tools 4170 IsuzuHondaJeep Wheel Bearing Locknut Socket

CTA Tools 4170 Isuzu/Honda/Jeep Wheel Bearing Locknut Socket

CTA Tools 4170 Isuzu/Honda/Jeep Wheel Bearing Locknut Socket - Inner diameter 1-15/16-inches and outer diameter 2-1/4-inches. Overall length 3-1/4-inches and inside depth 2-5/8-inches. Use with 1/2-inch drive tools. Applications ’88-up isuzu trooper, rodeo, amigo and pick-ups, ’89-up honda passport and jeep j20 pick-ups with dana 60 axle. 2-lug type socket.

 

OTC Tools 1958M 94mm 8-Point Metric Truck Wheel Bearing Locknut Socket

OTC Tools 1958M 94mm 8-Point Metric Truck Wheel Bearing Locknut Socket

OTC Tools 1958M 94mm 8-Point Metric Truck Wheel Bearing Locknut Socket - Impact tool use voids sockets’ warranty. Opening size 94 mm (8 pt. The otc 1958m is a specially designed socket that easily removes or installs locknuts. ). Note socket is designed for use with 3/4″ square-drive manual tools only. Made of high strength steel and resists rounding out.

 

Sunex 10619 2-58-Inch 6-Point Wheel Bearing Locknut

Sunex 10619 2-5/8-Inch 6-Point Wheel Bearing Locknut

Sunex 10619 2-5/8-Inch 6-Point Wheel Bearing Locknut - For those jobs that require a specialized tool, look no further than sunex tools specialty application sockets. This wheel bearing locknut socket is for use with 1/2-inch ratchet or breaker bar.

 

CTA Tools 4188 Ford Trucks 2-38-Inch Round Wheel Bearing Locknut Socket

CTA Tools 4188 Ford Trucks 2-3/8-Inch Round Wheel Bearing Locknut Socket

CTA Tools 4188 Ford Trucks 2-3/8-Inch Round Wheel Bearing Locknut Socket - Expertly designed and crafted to the exacting quality standards expected from cta tools these locknut sockets are specifically designed for use with 1/2-inch drive tools. California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. Cta tools 4188 wheel bearing locknut socket, ford trucks, 2-3/8-inches, round are engineered for use in removing and installing round nuts measuring 2-3/8-inches. Whether tuning up your ’68 corvette or changing the oil on a john deere tractor, cta can supply you with the tools needed to do the job. This set is designated for use with models 1990 and up ford rangers, bronco ii’s and explorers with automatic locking hubs. Heavy-duty construction allows for strength and durability.

 

OTC Tools Equipment 1941 4-1316 34 Drive 8 Point Wheel Bearing Locknut Socket

OTC Tools & Equipment 1941 4-13/16″ 3/4″ Drive 8 Point Wheel Bearing Locknut Socket

OTC Tools & Equipment 1941 4-13/16″ 3/4″ Drive 8 Point Wheel Bearing Locknut Socket - Fits special “rounded” hex nuts found on dana and some ford truck axles. 2-9/16 in truck wheel bearing locknut wrench, 8-point. Sockets are constructed with high-grade steel for added strength.

 

Powerbuilt 647069 55mm 6-Point Hex Wheel Bearing Locknut Socket

Powerbuilt 647069 55mm 6-Point Hex Wheel Bearing Locknut Socket

Powerbuilt 647069 55mm 6-Point Hex Wheel Bearing Locknut Socket - For use on toyota fj, rn and ln front axles with manual locking hubs. Built to exceed tool standards. Tool solutions for most all situations. Lifetime warranty. Made to be the most reliable tools in the market today. Heat-treated carbon steel.

 

AMPRO T75326 34-Inch Drive Truck Wheel Bearing Lock Nut Sockets 6 Point 3 34-Inch

AMPRO T75326 3/4-Inch Drive Truck Wheel Bearing Lock Nut Sockets 6 Point 3 3/4-Inch

AMPRO T75326 3/4-Inch Drive Truck Wheel Bearing Lock Nut Sockets 6 Point 3 3/4-Inch - 3/4-inch drive for attaching an extension rod for the hard to reach lock nuts in confined areas, ratchet can then be attached for additional torque. Hex opening fits over the lock nut for maximum surface area when tightening. Easy removal and installation on truck wheel bearings lock nuts. 6 point 3 3/4-inch socket.

 

Sunex 10603 2-916-Inch 8-Point Wheel Bearing Locknut

Sunex 10603 2-9/16-Inch 8-Point Wheel Bearing Locknut

Sunex 10603 2-9/16-Inch 8-Point Wheel Bearing Locknut - This wheel bearing locknut socket is for use with 1/2-inch ratchet or breaker bar. For those jobs that require a specialized tool, look no further than sunex tools specialty application sockets.

 

OTC 1939 5-14 6-point Wheel Bearing Locknut Socket

OTC 1939 5-1/4″ 6-point Wheel Bearing Locknut Socket

OTC 1939 5-1/4″ 6-point Wheel Bearing Locknut Socket - Measure from flat to flat to determine size of locknut. High-grade truck wheel bearing locknut socket is made of high-strength steel. Wheel bearing locknuts are easy to remove or install with these specially designed sockets. Designed for use with 3/4″ square-drive manual tools only. Opening size 5-1/4″ 6 point.

 

Powerbuilt 647068 2-34-Inch 6-Point Rounded Hex Wheel Bearing Locknut Socket

Powerbuilt 647068 2-3/4-Inch 6-Point Rounded Hex Wheel Bearing Locknut Socket

Powerbuilt 647068 2-3/4-Inch 6-Point Rounded Hex Wheel Bearing Locknut Socket - Heat-treated carbon steel. 2-3/4-inch 6 pt round hex socket for use on 1995-present ford f250 and f350 trucks with automatic hubs. Tool solutions for most all situations. Made to be the most reliable tools in the market today. Built to exceed tool standards. Lifetime warranty.

 

Powerbuilt 647067 2-916-Inch 6-Point Rounded Hex Wheel Bearing Locknut Socket

Powerbuilt 647067 2-9/16-Inch 6-Point Rounded Hex Wheel Bearing Locknut Socket

Powerbuilt 647067 2-9/16-Inch 6-Point Rounded Hex Wheel Bearing Locknut Socket - 2-9/16-inch 6 pt round hex socket for use on 1990-1993 dodge trucks with dana 60 manual hubs. Made to be the most reliable tools in the market today. Heat-treated carbon steel. Built to exceed tool standards. Tool solutions for most all situations. Lifetime warranty.

 

CTA Tools 4175 Ford Wheel Bearing Locknut Socket

CTA Tools 4175 Ford Wheel Bearing Locknut Socket

CTA Tools 4175 Ford Wheel Bearing Locknut Socket - Overall length 3-17/32-inches and inside depth 2-3/4-inches. Applications ’85-up ford f250 and f350 with dana 80 rear axle, ’87-up ford, e350 with dana 80 rear axle. 4-lug type socket. Other applications ’88-up ford f super duty with dana rear axle and 10-1/4-inch ring gear. Use with 1/2-inch drive tools.

 

AMPRO T75310 34-Inch Drive Truck Wheel Bearing Lock Nut Sockets 6 Point 3 12-Inch

AMPRO T75310 3/4-Inch Drive Truck Wheel Bearing Lock Nut Sockets 6 Point 3 1/2-Inch

AMPRO T75310 3/4-Inch Drive Truck Wheel Bearing Lock Nut Sockets 6 Point 3 1/2-Inch - 3/4-inch drive for attaching an extension rod for the hard to reach lock nuts in confined areas, ratchet can then be attached for additional torque. Hex opening fits over the lock nut for maximum surface area when tightening. 6 point 3 1/2-inch socket. Easy removal and installation on truck wheel bearings lock nuts.

 

OEMTOOLS 25470  2-332 Inch Truck Wheel Bearing Locknut Socket

OEMTOOLS 25470 2-3/32 Inch Truck Wheel Bearing Locknut Socket

OEMTOOLS 25470 2-3/32 Inch Truck Wheel Bearing Locknut Socket - Each oem truck wheel bearing locknut wrench has a 3/4 in square drive opening to be used with a hand ratchet or bar and extension torque wrench. Sockets are constructed with high-grade steel for added strength. A long extension may be used to provide necessary clearance when wide-rim wheel are involved, making removal and installation easy in all applications.

 

OTC Tools 1957M 90mm 8-Point Metric Truck Wheel Bearing Locknut Socket

OTC Tools 1957M 90mm 8-Point Metric Truck Wheel Bearing Locknut Socket

OTC Tools 1957M 90mm 8-Point Metric Truck Wheel Bearing Locknut Socket - Opening size 90 mm (8 pt. The otc 1957m is a specially designed socket that easily removes or installs locknuts. Note socket is designed for use with 3/4″ square-drive manual tools only. ). Impact tool use voids sockets’ warranty. Made of high strength steel and resists rounding out.

 

Sunex 10628 3-18-Inch 8-Point Wheel Bearing Locknut

Sunex 10628 3-1/8-Inch 8-Point Wheel Bearing Locknut

Sunex 10628 3-1/8-Inch 8-Point Wheel Bearing Locknut - For those jobs that require a specialized tool, look no further than sunex tools specialty application sockets. This wheel bearing locknut socket is for use with 1/2-inch ratchet or breaker bar.

 

Sunex 10624 3-1316-Inch 8-Point Wheel Bearing Locknut

Sunex 10624 3-13/16-Inch 8-Point Wheel Bearing Locknut

Sunex 10624 3-13/16-Inch 8-Point Wheel Bearing Locknut - This wheel bearing locknut socket is for use with 1/2-inch ratchet or breaker bar. For those jobs that require a specialized tool, look no further than sunex tools specialty application sockets.

 

CTA Tools 4166 Ford Wheel Bearing Locknut Socket

CTA Tools 4166 Ford Wheel Bearing Locknut Socket

CTA Tools 4166 Ford Wheel Bearing Locknut Socket - Overall length 3-7/32-inches and inside depth 2-3/4-inches. Use with 1/2-inch drive tools. Inner diameter 1-inch and outer diameter 2-3/4-inches. Applications ’03 and up ford f250, f350 and f450 super duty trucks with 10-1/2-inch rear axle. Heavy-duty construction ensures durability.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.