Digital AC clamp meter
- True rms (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform. Digital clamp meter measures alternating current (ac) and direct current (dc) to 400 amp, ac voltage and dc voltage to 600 volts (v), resistance to 40 megaohms. Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 600v. Accommodates conductors up to 118 inches (30mm) in diameter. Clamp multimeter. Max/min recording. Resistance measurement. Relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. Data hold. Relative measurement.
High presion 3 phase Intelligent TRMS Digital clamp Meter power factor correction multimeter for V/A/W/VA/kVA/KVAR/Hz/kW MS2203
- Three-phase digital power clamp meter is a handheld aptitude meter with power measurement. Ac voltage 01~600v ±(12%+5) ac current 01a~1000a ±(20%+5). Sensitivity clamp power meter 9999 counts. Ms2203 3-phase lcd professional high sensitivity clamp power meter 9999 counts power factor correction usb true-rms 4 wire testing. Lcd professional high sensitivity clamp power meter.
Fluke 324 40/400A AC, 600V AC/DC True-RMS Clamp Meter with Temperature, & Capacitance Measurements
- Cat iv 300v/cat iii 600 volt safety rating. Temperature and capacitance measurement. Audible continuity sensor confirms that the circuit conducts electricity. Meets iec safety standard 61010-1, and is rated for cat iv installations to 300v and cat iii installations to 600v. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms. Large, easy to read backlight display. Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit. Hold button. Slim, ergonomic design.
Fluke 381 Remote Display True-RMS AC/DC Clamp Meter with iFlex
- Wireless technology allows the display to be carried up to 30 ft away from the point of measurement for added flexibility without interference with measurement accuracy. Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments. State of the art signal processing allows for use in noisy electrical environments while providing stable readings. Cat iv 600 v, cat iii 1000 v. Iflex flexible current probe expands the measurement range to 2500 a ac. The removable magnetic display can be conveniently mounted where it is easily seen. Soft carrying case. True-rms ac/dc voltage and current for accurate measurements on non-linear signals. Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement.
Amprobe ACD-14 PLUS Dual Display Digital Clamp Multimeter with Temperature
- Digital clamp meter measures alternating current (ac) to 600 amp, direct current (dc) voltage and ac voltage to 600 volts (v), dc and ac microcurrent to 2,000 microamp, capacitance to 3,000 microfarads, resistance to 40 megaohms, and frequency to 100 khz. Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 600v. K-type thermocouple probe measures temperature. Transformer clamp with 1″ (26 mm) jaw opening measures current and frequency without touching or interrupting the circuit.
Fluke 345 Power Quality Clamp Meter, LCD Display, +/-3 Degrees Accuracy, 0.001 Resolution, 0 to 50 Degrees C Temperature Range, 12″ Length x 3.75″ Width x 2″ Depth
- Meets iec safety standard 61010-1, and is rated for cat iv installations to 600v and cat iii installations to 1,000v. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. Digital power quality clamp meter measures ac to 1,400 amp and dc to 2,000 amp, ac and dc voltage to 825v, frequency to 1khz, and harmonics to the 30th harmonic. Measures watts, real power, reactive power, apparent power, power factor, and kilowatt hour (kwhr) usage of single- or three-phase balanced power sources. Jaw opening measures current in a conductor up to 58mm without touching or interrupting the circuit.
Fluke 1630 Earth Ground Clamp Meter
- Clamp with 33mm (13 inches) jaw opening measures current without touching or interrupting the circuit. Meets iec safety standards 61010-1 and 61010-2-032 (pollution degree 2), and is rated for cat iii installations to 300v. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. High/low alarm sounds when measurements fall outside settings programmed by the user. Digital clamp-meter measures ground leakage alternating current (ac) from to 02 to 30a and ground loop resistance to 1,500 ohms.
Amprobe AD40B Mini-Clamp Ammeter
- Hold function keeps the reading on the display, even after the meter is disconnected. Digital clamp meter measures alternating current (ac) to 400 amp. Transformer clamp with 1″ (25 mm) jaw opening measures current without touching or interrupting the circuit. Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 600v.
Amprobe ACDC-3400 IND AC/DC CAT IV True-RMS Clamp Meter
- Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 1,000v and category iv installations up to 600v. True rms (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform. Relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. Digital clamp meter measures alternating current (ac) and direct current (dc) to 1,000 amp, dc voltage to 1,000 volts (v), ac voltage to 750v, capacitance to 66 millifarads, resistance to 66 megaohms, frequency to 1 megahertz (mhz), and duty cycles. Clamp with a 2″ (57 mm) jaw opening measures current without touching or interrupting the circuit.
Fluke 771 Milliamp Process Clamp Meter
- Best in class accuracy of 02%. Detachable clamp with extension cable allows measurements in tight locations. Compact clamp meter for plc and control systems analog i/o. Built-in spot light illuminates hard to see wires in dark enclosures. Measure 4-20 ma signals without breaking the loop.
Fluke FLUKE-A3004FC Wireless 4-20 Milliamp DC Clamp Meter
- Measure 4 to 20 ma signals without “breaking the loop”. Detachable clamp with extension cable for measurements in tight locations. Use as a standalone meter or as part of the system.
Auto ranging AC/DC Digital Clamp Meter
- Rugged design for reliable use in the field. Safe for non-invasive current measurements of up to 1000 amps. This clamp meter is an auto/manual ranging, professional meter with digital analog display. Advanced design for the trouble shooting of electrical, heating and air conditioning systems. For more than 30 years elenco has been producing reliable as well as affordable electronic test equipment, tools, and educational kits.
Mastech MS2138R with Tekpower Line Splitter M920, Auto Ranging True RMS AC/DC Voltage and AC/DC Current Clamp Meter With Tekpower Wire Splitter and Super Bright LED Flashlight on the Top
- 90-day money back guarantee. Overrage, low battery and polarity indication. In full conformance with iec1010 cat iii. True rms digital clamp on 3 3/4 digits multimeter with highest resolution & best quality with wire, line splitter. Auto-range, auto zero, auto power-off, back light, flash light, data hold, min & max memories.
A.W. Sperry DSA-700 6-Function 12-Range 700-Ampere Digital Clamp Meter
- Switchable ac current range 30 a, 300 a, 3000 a. Ac voltage probe output for wider compatibility. Convenient 45 cm (18″) flexible clamp with locking mechanism. Standard banana plug cables fit most meters. Adds 3000 a ac current measurements to existing meters.
XCSOURCE UNI-T UT202A LCD Digital Multimeter Handheld Clamp Meter Resistance Frequency Tester AC DC Ohm BI151
- Ut202a is a stable, secure, and reliable 3 1/2 digit clamp meter. Diameter for conductor φ26 mm product net weight 220g product size 210mm 75. 6 18 mm power supply 1x 9v 6f22 max. 5%+5) ac voltage (v) 2v/20v/200v/600v ±(1. 8%+3) display lcd, max. 6mm 30 mm lcd size 35. Whole circuit design to lsi double integral a / d converter as the core, the whole range of overload protection circuit, unique design makes it the superior performance of a dedicated electrical instruments. (Ps cannot test dc current) can be used in places such as factory, school lab, home hobby, machine repairing, etc. 2%+5) dc voltage (v) 200mv/2v/20v/200v/600v ±(0. 6mm 18 mm product color red and grey note battery is not included. Package included 1 x ut202a clamp meter 1 x test leads 1 x user manual 1 x carrying pouch 1 x lanyard. Features display count 2000 compact size ac clamp meter, up to 600 amps jaw capacity 28mm input impedance for dc v around 10mw ac/dc voltage, resistance, continuity & diode check manual range + data hold + maximum/minimum value measurement continuity buzzer low battery indicator measurement update speed 3 times/second, compact and comfortable design compliance with safety requirements iec 61010, cat iii 600 v / cat iii 300 v can be used for ac/dc voltage test, ac current test, electric current resistance, diode test, etc. 8%+1) resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2mΩ/20mΩ ±(0. It can be used to measure the dc voltage, ac current, resistance, diodes, circuit continuity and so on. Specification model ut202a ac current (a) 20a/200a/600a ±(1. 1999 digits, 35.
Amprobe ACD-41PQ 1000A Power Quality Clamp Meter with Temperature
- Digital clamp meter measures alternating current (ac) to 1,000 amp, direct current (dc) voltage and ac voltage to 600 volts (v), resistance to 1,000 ohms, frequency to 500 hertz (hz). True rms (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform. K-type thermocouple probe measures temperature. Transformer clamp with 177″ (45 mm) jaw opening measures current without touching or interrupting the circuit. Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 600v.
Fluke FLK-VT04-ELEC-KIT Electrical Kit for Visual Infrared Thermometer, Includes IR Thermometer, Digital Multimeter, and True-RMS Clamp Meter
- Electrical kit includes fluke vt04 visual infrared thermometer, model 117 digital multimeter, and model 376 clamp meter to troubleshoot electrical, hvac/r, and automotive applications. Model 117 dual-impedance digital multimeter measures true rms ac amp and volts, dc amp and volts, continuity, ohms, capacitance, low impedance (loz) capacitance, and hertz. Model 376 true rms clamp meter measures ac current and voltage, dc current and voltage, resistance, frequency, capacitance, and continuity. Vt04 visual infrared thermometer has a built-in digital camera, hi-low temperature alarms, time-lapse image capture and a measurement range of 14 to 482 degrees f (-10 to +250 degrees c). Meters meet industry standards for safety compliances.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
