Ken-Tool (31432) Bead Expander
- Weight 2-1/4 lbs. 2-1/4 diameter. Fits most passenger car tires. 70 psi safety release valve. Tough nylon cover and neoprene inner tube. Tested and approved for bias ply and belted bias tires.
Ken-tool 35926 Heavy Duty Impact Bead Breaker
- Bead breaker loosens beads with bead breaking foot and ram bar, but never cuts the bead of the tire. No other bead breaking tools are necessary. The wedge foot is forced between the bead and rim flange. Provides greater accuracy than other conventional bead breakers. Breaker is designed for shop or road use.
Ken-Tool Division Kt33220 Curved 30 in. Tire Iron and Spoon T20A
- 1 lbs. Item weight, 3. Item size, 30 in. For fast and efficient tire changing with enough strength and leverage to work on large truck buses tractoraircraft tires. Model no, t20a. Curved spoon tire iron.
Ken-Tool 32116 16″ Tire Iron
- Pro tire changing tools for small tires ideal for mounting and demounting motorcycle, atv, lawn tractor, golf cart and small tires by hand rounded ends will not pinch tube length 16 (41 cm) stock 7/16 (11 mm) patented weight. 7 lbs (. 3 kg).
Ken-Tool (35325) Wood Handled Hammer
- These hammers make tire changing faster and easier for passenger car, truck, bus, farm tractor, and aircraft tires. Use rubber head replacement t34rh (35105). Non-marring rubber end can be used for driving on lock rings. Used for mounting and demounting tires.
Ken-Tool (35219) Replacement Handle Kit for Tire Hammer
- Tg11ch replacement hdle kit. Keep wrenches in trunk for emergencies or everyday use. Metric socket sizes. Drop forged centers for extra strength. Length 20″.
Ken-Tool (34652) Bead Breaker Leverage Bar
- Convenient compact storage case. T52 bead breaker levg bar. Non-marring sockets for delicate wheels with minimal clearance for car / light truck. Super serpenttm 5pc tire changing set.
Ken-Tool (32129) Wheel Lock Ring Set
- Until now, removing and replacing the split lock rings on multi-piece industrial wheels was difficult and potentially dangerous. The pry-out end of the tool reaches behind the slotted end of the split lock ring to pry it out and over the flange of the wheel. This unique tool set is patent pending and helps to prevent injury by keeping the technicians’ hands safe from harm and outside the tire press cage at all times. Next, the mount/demount tool, item #32130 finishes the job. The demount end of the tool lifts and fully demounts the split lock ring, and the mounting end easily sets the new split lock ring in place after a new tire has been installed. The kit comes with two tools using the demount prep tool, item #32131, the technician inserts the separator end of the tool between ends of the split lock ring and the solid flange ring. Having the right tool really does make a difference when changing tires on forklifts or other material handling vehicles that have wheels with split lock rings. This part of the tool helps break the rings free from each other especially when they are rusty or dirty, and then allows a gap to form between the rings. Designed to help tire technicians safely, easily and quickly remove and replace split lock rings on multi-piece industrial forklift wheels.
Ken-Tool (31439) Tire Bead Seater
- Ken-tool 31439 tire bead seater for 22-1/2″ to 24-1/2″ rims. As tire inflates, the seater forms a seal between the rim and the tire. When pressure is reached, seater is pushed off. Use bead lubricant with bead seater. 3 lbs. One piece rubber tube for mounting hard-to-seal radial, bais-belted or conventional truck tires. Fits rim sizes 22-1/2″ to 24-1/2″. Weight 2.
Ken-Tool Tire Mount/Demount Set – 19.5in., Model# 33195
- Works on both aluminum and steel wheels. Powder-coated, forged high-grade carbon steel construction provides extra strength and durability. Includes tire mounting/demounting tool, aluminum wheel bead holder, solid brass bead holder for steel wheels and leather wheel protector.
Ken-Tool (31714) Aluminum Bead Holder
- Ken tool 31714 aluminum bead holder, cabled pair keeps bead from slipping over rim when mounting tire on wheel features special c-loktm shape fits nearly all passenger, light truck, agriculture and truck wheels without slipping off patent pending aluminum design is lightweight but very strong and is less likely to mar alloy wheels great for super singles and super wide wheels, fits both steel and aluminum wheels.
Ken-Tool 32120 24″ Curved Tire Mount/Demount Spoon
- Designed for fast and efficient tire changing. Use to mount or demount passenger car, motorcycle, atv, and light truck tires.
Ken-Tool (35446) Tire Changing Set
- Limited lifetime warranty. Super serpenttm 5pc tire changing set. Non-marring sockets for delicate wheels with minimal clearance for car / light truck. Convenient compact storage case.
Ken-Tool (35327) Bead Breaking Wedge
- T11d bead breaking wedge. Diameter 11/16 inches. Length 30 inches.
Ken-Tool 34647 HD Truck Tire Iron
- Length of 41 inch stock of 7/8 inch. Demount end precision-forged angled tip slides between bead and rim easily forged design won’t slip when demounting the second bead. Precision-forged knob grips rim tip designs won’t slip during tire mounting special curve design always grabs the bead edge. Weight of 7 pounds. Always wear safety goggles when using hand tools.
Ken-tool KEN30259 1/2″ Drive 6 Point Thin Wall Impact Socket Set, 7 Piece (7 Piece 1/2″ Drive 6 Point Thin Wall Impact Socket Set)
- Convenient compact storage case. Non-marring sockets for delicate wheels with minimal clearance for car / light truck. Made of chrome-moly steel. Limited lifetime warranty.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
