Professional Pitman Arm Puller-2pack - Professional pitman arm puller. Item package quantity-2.
TMS FrontEndToolKit-ZH-(6pc) Front End Service Tool Kit, 6 Piece (Ball Joint Separator Pitman Arm Tie Rod Pullerwith Carrying Case) - Features heavy duty forged alloy steel allows for easy removal of most popular types of pitman arms, tie rods and ball joints. Specifications large swing arm puller 0 to 2 1/2″ jaw spread, 3 1/4″ throat depth large rocker arm puller 7/8″ jaw spread, 2 1/4″ throat depth. Condition brand new material steel6pc (5 tools+1 carry case) front end service tool kit. Package included 1x pitman arm/tie rod end puller 1x ball joint separator 1x pitman arm puller 1x ball joint/tie rod end remover 1x tie rod/inner bearing race puller 1x carrying case.
SD PITMAN ARM PULLER - Sd pitman arm puller by bosch automotive service solutions. E-packet will be applied for international shipping. Remove tie rod ends and pitman arm assemblies from most cars and light trucks. Pitman arm puller by bosch automotive service solutions. Tie rod end pitman arm puller.
BETOOLL 5pcs Front End Service Tool Set Separate Pitman Arm Tie Rod End Puller Ball Joint - △—Material–heavy duty forged alloy steel. △—Supplied in storage case. △—Practicability–allows easy removal of most popular types of pitman arms, dtie rods and ball joints found on domestic/import automotive and light truck applications. △—press type ball joint separator allows for ball joint removal without damage to boots and other parts.
OEMTOOLS 25262 Pitman Arm Puller - The oem pitman arm puller is designed to remove the pitman arms from domestic cars and light trucks. 2-1/2-inch (63mm) depth yoke is drop forged constructed and heat treated for strength and durability. Designed for professional auto mechanics and heavy duty applications. 1-5/16-inch (33mm) yoke opening. Comes assembled in clamshell package.
27 mm Heavy Duty Pitman Arm Puller Tie Rod Ends Pitman Arm Assembly Tool A5138 - Specifications • heavy duty forged alloy steel • heat treated centre screw. Heavy-duty specialized tool for removing the pitman arm in steering linkage for repair or replacement also handy for gear, wheel, and bearing pulling applications you might run across in the future made by professionals for professionals. The pitman arm puller is designed to pull the pitman arm off of the steering gear in most passenger cars, trucks and vans. • Opening 27mm.
TRUCK PITMAN ARM PULLER-62mm BY JTC 4073 - Different size parts for different applications. This kit is suitable for most cars and light commercials don’t hesitate to buy it. Truck pitman arm puller-42mm. Truck pitman arm puller-62mm.
Ambienceo 5PCS Front End Remover Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller with Carring Case (Red) - It will permit part reuse versus”pickle-fork”type tools that may damage parts. Designed to remove pitman arms,tie rods,and ball joints on most vehicles easily. Come with a sturdy carrying case for easy storage and transport. Made of premium forged alloy steel for maximum durability and strength. Adjustable ball joint separator helps to remove different joints easily without any damage or distortion to boots and other parts.
PITMAN ARM PULLER JTC 1952 - 1. Heavy duty forged alloy steel yoke. • remove tie rod ends and pitman assemblies from many light trucks. 2. If his truck is bigger than f350, then he needs more strong puller to perform. • Opening size 33mm • pull travel 64mm. The center blot need to be greased before first time use and need to wipe grease clean after each use.
Pitman Arm Puller Ball Joint Separator Tie Rod Remover Front End Service Tool Kit Set -5pc - Press type ball joint separator allows for ball joint removal without damage to boots and other part. Easy to remove most popular types of pitman arms, tie rods and ball joints. Comes with pitman arm puller, universal ball joint separator, outer tie rod remover, and 2 tie rod end pullers. All tools were packed in a convenient abs carrying case for easy storage and transportation. Made of heat-treated alloy steel, with great strength and durability.
Pitman Arm Puller-2pack - Puller removes full-size pitman arms to use, mount jaws over pitman arm and turn center screw with wrench until tight strike center screw with hammer to release pitman arm no other tools are needed puller has a drop-forged and heat-treated steel yoke screw size 5/8 inch-18 thread.
Lisle 41970 Heavy Duty Pitman Arm Puller for Ford by Lisle - It will permit part reuse versus”pickle-fork”type tools that may damage parts. Made of premium forged alloy steel for maximum durability and strength. Truck pitman arm puller-47mm. Designed to remove pitman arms,tie rods,and ball joints on most vehicles easily. Adjustable ball joint separator helps to remove different joints easily without any damage or distortion to boots and other parts.
M2 OUTLET 5pc Tie Rod Ball Joint Remover Seperator Pitman Arm Puller Pickle Fork Tool - Different size parts for different applications. This kit is suitable for most cars and light commercials don’t hesitate to buy it. 5pc tie rod pitman arm separator kit to separate ball joints and tie rods. Three forks with interchangeable shafts for use with regular hammer or air hammer.
AMPRO T72069 Pitman Arm Puller - It removes pitman arms from most cars. The opening size is 1 5/16-inch and can pull 2 ½-inch. The pitman arm puller is made for heavy duty work, and from heat treated, drop forged steel.
5pcs Professional Front End Service Tool Kit, Pitman Arm Puller, Ball Joint Separator Tie Rod Remover Tool - Total 5 units tools are in different shapes and sizes, can remove even the most stubborn ball joints/ tie rods/ pitman arms. List 1x ball joints separator, 2x c-shape small/ large pitman arms puller, 2x tie rods remover. All tools were packed in a convenient abs carrying case for easy storage and transportation. Professional front end service tool set makes it easy to separate pitman arms, tie rods, and ball joints without damage. Made of heat-treated alloy steel, with great strength and durability, offering 1 year warranty.
KTI (KTI-70365) Pitman Arm Puller - Use -pitman arm. -both yoke and center screw are heat treated. Quanitity -single. A. -Made in the u. Kti70365 features -tool provides steady, smooth pull of a screw type puller needed for bigger jobs. -Heavy duty yoke is drop forged from alloy steel. Product type -pullers. 75 inches. Overall width, side to side -7. S. Generic dimensions -weight 2. 1 lbs. Dimensions overall height, top to bottom -1. Overall depth, front to back -9. 75 inches. Overall product weight -2 pounds. 75 inches.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.