Lisle 55250 Carburetor Adjusting Tool
- Four adapters conveniently store in the hollow handle. Heavy-duty flexible shaft for easy access. For adjusting idle / mixture screws on gm and chrysler.
Lisle 18810 Valve Core Torque Tool
- Helps prevent valve core leaks causing low tire pressure and possible tpms alerts. Torque tool is set to 4 inch pounds, to prevent under and over torquing the valve core. Properly installs and removes valve cores, including late model vehicles with the tire pressure monitoring system (tpms). Slim design allows access in tight spots.
Lisle 57780 Terminal Tool for Ford
- Quickly and easily releases wires without damage to the wires or terminal blocks. The single blades have a bevel ground onto the end for working on small wire terminals found on newer vehicles.
Lisle 25000 Rear Disc Brake Caliper Tool
- Lisle rear disc brake caliper tool is used for rotating pistons back into the caliper to provide clearance for new pads. A real time saver that makes this tough job easy and helps prevent damage to the piston and boot.
Lisle 22100 Flywheel Locking Tool for 6.6L Duramax
- Locks flywheel in place when removing harmonic balancer on 66l duramax engines with allison automatic transmissions. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Package dimension is 45 inches width by 5 inches height by 2 inches depth.
Lisle 35240 Belt Molding Tool Small
- Works on most domestic and import vehicles. Makes removal of newer belt moldings easy. For moldings with metal clips, hook the tool under each clip and pull up. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door tab. Quickly removes belt molding without damage.
Lisle 63000 Fuel Tank Lock Ring Tool
- The design is compact so the tool is not left hanging over the work area with the potential for hitting other components. Works on the new smaller gm serrated rings and traditional rings. Channel design on body allows the legs to adjust to fit a wide range of applications and keeps the drive centered. A stout tool to remove and install plastic fuel tank lock rings from 4 inches to 7-1/4 inches without damage.
Lisle 59000 Ratcheting Serpentine Belt Tool
- Now includes 19mm socket for honda and toyota applications. This tool will work where conventional ratchets or breaker bars won’t fit due to limited access. Comes with extension for hard-to-reach idler pulleys. Ratcheting head with freewheel position allows maximum leverage. Includes, 57390 14mm socket / 57440 15mm socket / 57450 18mm socket / 57500 13mm socket / 57530 3/8″ square drive / 57560 1/2″ square drive / 57580 16mm socket / 59100 extension / 59140 19mm socket / 59190 handle assembly. Set ratcheting head to the middle or neutral/freewheel position and once maximum travel point is reached simply click lever into place to lock the ratchet mechanism.
Lisle 49960 Pneumatic Tool Holder
- Comes with five slots that fit all popular quick connect fittings from milton, lincoln, amflo and others. Tool can hold up to five pneumatic tools in a 10″ space. Durable powder-coated finish. Locking feature protects your air tools from theft (provide your own lock). Can be mounted on a tool box, cart or wall for easy access.
Lisle 29350 Combination Rear Brake Tool Kit
- Turn with 9/16″ wrench or socket. Shaft y be rotated both directions depending on the vehicle friction. Designed to work on single in st on disc brakes that require the in st on to be rotated back into the plier s well s pistons that re not rotated includes two, double-sided thin in deters long with in less pushing deter.
Lisle 34920 Door Latch Release Tool
- The tool is designed to work on 2007-2013 chevy and gmc pickups, suburban, tahoe, avalanche and yukon vehicles. Fit type vehicle specific.
Lisle 45750 Inner Tie Rod Tool
- Utilizes five crows feet to engage the wrench flats. Works on rounded sockets ends that prevent access to the wrench flats. Includes 1-1/2in crowfoot for use on chevrolet colorado and gmc canyon. Inner tie rod can be removed and installed without removing the rack. Utilizes six cros feet sizes 1-1/2″ 1-3/16″ 1-5/16″ 1-7/16″ and 336mm.
Lisle 39400 Angled Disconnect Tool Set
- Available in six sizes as 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch. Disconnects spring lock couplings on ford and chrysler ac lines. Works on fuel lines and other quick disconnect couplings on domestic and import vehicles. The handles are angled to access tight spots. All disconnects available in individually skin-packed. Made of durable plastic that resists fuels and solvents.
Lisle 31370 Adapter for Double Flaring Tool Set, 3/16″
- Makes both single and double sae flares. For more information check the main lisle tool- 31310. Replacement part for lisle tool- 31310.
Lisle 60900 Heater Core Backflush Tool
- The spray gun attaches to a standard garden hose. The tip fits 1/2″, 5/8″ and 3/4″ hose fittings. The insulated handle protects your hand when using hot water to flush the cooling system. Water pressure can be easily controlled with one hand by squeezing the handle of the heavy-duty spray gun.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
