MIG Series Gas-Less Flux Core Wire Welder Welding Machine Automatic Feed Unit DIY (MIG-195)
- Duty cycle 10% at 180amp, 60% at 74 amp, 100% at 60 amp. Welding current 60- 190amp (min). Max open circuit voltage 342v. Wire capacity 0031 (08mm) steel & stainless steel, 0030″ to 0039″ (10mm) aluminum. Wire capacity 0047(12mm) flux core, 0023″ to 0035″90 (06-08mm) flux core.
Shark Welding 12008 Flux-Core Mig Wire E71T-GS .030 – 2 lbs.
- This flux-cored steel wire is used without gas as a shielding agent on mig welders with reverse polarity. E71t-gs gasless flux cored mig wire. Produces a deep penetrating weld.
Gizmo Supply MIG-130 Flux Core Wire Welder Machine 115V
- High quality mig-130 mig welder comes with torch, tip, grounding cord, clamp and protective welding shield. Ideal for welding mild steel. Unit includes includes mig-130 main unit, welding wire, welding mask, chipping hammer/ wire brush, torch, tip and ground cord. Great for hobby use, light fabrication, auto body, & home use.
Shark Welding 12010 Flux-Core Mig Wire E71T-GS .035 – 10 lb.
- E71t-gs gasless flux cored mig wire. Produces a deep penetrating weld. This flux-cored steel wire is used without gas as a shielding agent on mig welders with reverse polarity.
Forney 42301 Flux Core Mig Wire, Mild Steel E71TGS, .030-Diameter, 10-Pound Spool
- Excellent on 18-gauge mild steel or thicker. All position flux core mig wire for mild steel that is a self shielded and works well on rusty, dirty and painted material. Best suited to single pass applications with high travel speed, runs hotter than solid wires. Excellent for outdoor windy conditions. Although no gas is required, an argon/co2 mix will reduce spatter.
Goplus MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine w/ Free Mask
- 【Portable design & wide applications】it is perfect for welding normal thin steel and iron, perfect for home diy and general repairing work mini size but also practical, it will obtain a professional finish in welding features a easy carrying handle, light weight, compact design, easy for translation and storage very convenient, can be used anywhere u need. 【Flux-cored wire, no gas welder】uses convenient flux-cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part. 【Many complimentary necessities】two air-vent on the machine to help heat dissipation the welding gun with full on / off safety control standard american triangle ground cord and automatic thermal safety protection comes with a reel of 09mm, 055lbs welding wire, a protection mask and a brush/chipping hammer. 【household smart welder】compact and exquisite mig gas welder, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span. 【4 levels adjustable welding speed】features 4 levels of current flow settings, by adjusting the 4 buttons for min/max,1/2 also features a wire feeding speed adjust rotary knob 10 levels of wire feeding speeds for your choice.
Weldcote E7It-11 .035 X 10# Spool Flux Core Wire 10 lbs
- All position flux core mig wire for mild steel that is a self shielded and works well on rusty, dirty and painted material. Excellent on 18-gauge mild steel or thicker. Excellent for outdoor windy conditions. 10 lb. Best suited to single pass applications with high travel speed, runs hotter than solid wires.
Hobart H222108-R22 10-Pound E71T-11 Carbon-Steel Flux-Cored Welding Wire, 0.035-Inch
- Wire size (in. ). Features great single or multi-pass welds on mild or stainless steel. 035, product type welding wire, wire material flux core, compatible with mig welders, welding processes single or multi-pass welds on mild steel, weight (lbs. Flux core wire enables user to weld without using a shielding gas on straight polarity mig welders. ) 10.
Weldcote E71T1 .045 X 33# Spool Flux Core Wire 33 lbs
- Weldcote metals e71t-1, features lower spatter and fume emissions than conventional products in this class. This electrode is intended for single and multiple pass welding of carbon and certain low alloy steels in all positions, particularly in the overhead and vertical up positions. Weldcote metals e71t-1 is used where a minimum tensile strength of 70,000 psi is required in the deposited weld metal.
Weldcote E71T1 .052 X 33# Spool Flux Core Wire 33 lbs
- Weldcote metals e71t-1 is used where a minimum tensile strength of 70,000 psi is required in the deposited weld metal. This electrode is intended for single and multiple pass welding of carbon and certain low alloy steels in all positions, particularly in the overhead and vertical up positions. Weldcote metals e71t-1, features lower spatter and fume emissions than conventional products in this class.
MIG And Flux Core Wire Feed Welder
- Wg2160 features -product typemig welders -product typeflux core welders -gas typeno gas -maximum voltage115 -output amperage70 -input amperage20 -contact tips includedyes -thermal overload protectionyes -torch includedyes. Dimensions -overall height, top to bottom19 -overall width, side to side15 -overall depth, front to back11 -overall product weight78.
SUNGOLDPOWER 200 Amp MIG MAG Arc MMA Stick Multifunction DC Welder 110/220V Dual Voltage IGBT Inverter Welding Soldering Machine Gas Shielded / Gasless Flux Core Wire Automatic Feed Welding
- 3 adjustable welding voltage and current, the full-size mig platform, outperforming the competition on arc quality, voltage control, 60% duty cycle ensures long time welding. 5 the perfect choice for projects and repairs around the home and auto body shop. 4 adopting unique welding dynamic characteristic control circuit in mig, stable arc, little spatter, beautiful weld bead, high welding efficiency. 1multifunction：110v/220v dual voltage mig/mag/arc/mma welder, gas-less flux-cored welding and gas-shielded mig welding are available for the machine. 2powerful welder capable of welding mild steel, weld steel, stainless steel and cast iron igbt power device with unique control mode improves the reliability of welding machine.
Hot Max 23107 .035-Inch MIG Welding Flux Core Wire – 10#
- Tensile strength 80,000 psi. Mig welding flux core wire (e71t-gs) alloy is a high strength flux core wire which produces a deep penetrating weld without shielding gas. Shielding gas none required but 75-percent co2/25-percent argon (c-25) will reduce spatter. Excellent in windy conditions. Machine polarity dcen straight polarity (mig dc -).
US Forge Welding Flux-Cored MIG Wire .030 10-Pound Spool #00064
- Excellent for use on fillet and lap welds on thin gauge steel where burn through is a problem with other wires and electrodes. Excellent for use with small constant current wire feeders which are lightweight. Fabrication and repair of lightweight structural steel, trailers, tanks, hoppers and machinery parts. Ideal to use in drafty or windy conditions where gas shielded wires cannot be used.
US Forge Welding Flux-Cored MIG Wire .030 2-Pound Spool #00062
- Excellent for use on fillet and lap welds on thin gauge steel where burn through is a problem with other wires and electrodes. Excellent for use with small constant current wire feeders which are lightweight. Fabrication and repair of lightweight structural steel, trailers, tanks, hoppers and machinery parts. Ideal to use in drafty or windy conditions where gas shielded wires cannot be used.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
